Facility Name:Bailey Mine-Crabapple Portal
Facility Identifier:
Facility Reporting Year:2022
Facility Location:
Address: 192 Crabapple Rd.
City: Wind Ridge
State: PA
Postal Code: 15380

Facility Site Details:
CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):2,564,327.6
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):0
Cogeneration Unit Emissions Indicator:N
GHG Report Start Date:2022-01-01
GHG Report End Date:2022-12-31
Description of Changes to Calculation Methodology:
Plant Code Indicator:N
Primary NAICS Code:
Second Primary NAICS Code:

Parent Company Details:
Parent Company Name:CONSOL ENERGY INC
Address:1000 Consol Energy Drive, Suite 100, Canonsburg,  PA 15317
Percent Ownership Interest:100

Subpart C: General Stationary Fuel Combustion

Gas Information Details

Gas NameCarbon Dioxide
Gas Quantity6,126.7 (Metric Tons)
Own Result?

Gas NameBiogenic Carbon dioxide
Gas Quantity0 (Metric Tons)
Own Result?

Gas NameMethane
Gas Quantity0.12 (Metric Tons)
Own Result?

Gas NameNitrous Oxide
Gas Quantity0.012 (Metric Tons)
Own Result?

Unit Details:
Unit Name : GP-Degas Wells
Unit Type : OCS (Other combustion source)
Unit Description :
Other Unit Name :
Small Unit Aggregation Details:
Use Ivt Indicator: N
Highest Maximum Rated Heat Input Capacity: 1.85
Cumulative Maximum Rated Heat Input Capacity:

Emission Details:
Annual CO2 mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)
Annual Fossil fuel based CO2 Emissions: 0 (metric tons)

Tier Fuel Details:
Fuel : Natural Gas (Weighted U.S. Average)
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2022-01-01
Tier Methodology End Date : 2022-12-31

Fuel Emission Details :
Total CO2 emissionsTotal CH4 emissionsTotal N2O emissionsTotal CH4 emissions CO2eTotal N2O emissions CO2e
6126.7 (Metric Tons) 0.12 (Metric Tons) 0.012 (Metric Tons) 2.9 (Metric Tons) 3.4 (Metric Tons)

Equation C1/C8 Inputs :
Fuel Quantity : 112540692 (scf/year)


Subpart FF: Underground Coal Mines

Gas Information Details

Gas NameCarbon Dioxide
Gas Quantity30,844.3 (Metric Tons)
Own Result?

Gas NameMethane
Gas Quantity101,094 (Metric Tons)
Own Result?


SubpartFFSummaryDetails:
MSHA Individual Identification Number:3607230
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]24527.89
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]6905.1601954
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]22996.63
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]7703.1097415
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]26513.35
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]8278.8117992
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]27056.13
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]7957.1906027


DegasCollectionDetails:


DeGasCollectionSystemRowDetails:
Degasification Gas Collection System Unit ID or Name [§98.326(q)]9L-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]6777
Degasification Gas Collection System Unit ID or Name [§98.326(q)]9L-2
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]4761
Degasification Gas Collection System Unit ID or Name [§98.326(q)]8L-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]3706
Degasification Gas Collection System Unit ID or Name [§98.326(q)]10-J-2
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]112
Degasification Gas Collection System Unit ID or Name [§98.326(q)]10-J-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]4389
Degasification Gas Collection System Unit ID or Name [§98.326(q)]8L-3
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]8028
Degasification Gas Collection System Unit ID or Name [§98.326(q)]9L-3
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]6944
Degasification Gas Collection System Unit ID or Name [§98.326(q)]9L-4
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]6609
Degasification Gas Collection System Unit ID or Name [§98.326(q)]11J-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]176
Degasification Gas Collection System Unit ID or Name [§98.326(q)]7L-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]7956
Degasification Gas Collection System Unit ID or Name [§98.326(q)]11J-2
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]7872
Degasification Gas Collection System Unit ID or Name [§98.326(q)]12J-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]5425
Degasification Gas Collection System Unit ID or Name [§98.326(q)]1K-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]1226
Degasification Gas Collection System Unit ID or Name [§98.326(q)]10L-1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]4356
Degasification Gas Collection System Unit ID or Name [§98.326(q)]10L-2
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]2675
Degasification Gas Collection System Unit ID or Name [§98.326(q)]10L-3
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]1314
Degasification Gas Collection System Unit ID or Name [§98.326(q)]10L-4
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]
Surface Area, m2 [§98.326(q)]1
Annual Operating Hours [§98.326(q)]267


WellAndShaftDetails:


WellAndShaftCollectionRowDetails:
Well and Shaft ID or Name [§98.326(r)]9J Bleeder Fan North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]9J Bleeder Fan South Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]9J Bleeder Fan West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]1K Bleeder Shaft North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-08-28
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]126
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]1K Bleeder Shaft East Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-08-28
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]126
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]1K Bleeder Shaft South Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-08-28
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]126
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]7L Bleeder North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]7L Bleeder West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]7L Bleeder South Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]4South #1 South Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]4South #1 East Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]4South #1 North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]6 South #2 South Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]6 South #2 West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]6 South #2 North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]6 South #1 North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]6 South #1 West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]4J Bleeder South Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]4J Bleeder West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]4J Bleeder North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]5 South #4 Lone Oak West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]5 South #3 Irish Ridge West Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]5 South #1 North Leg
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]MSHA Quarterly Monitoring Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]9L-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]9L-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]282
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]9L-2
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]9L-2
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]198
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]8L-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]8L-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]154
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]10-J-2
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]10-J-2
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]5
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]10-J-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]10-J-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]183
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]8L-3
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]8L-3
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]335
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]9L-3
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]9L-3
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-02-21
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]289
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]9L-4
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]9L-4
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-03-28
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]275
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]11J-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]11J-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]7
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]7L-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]7L-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]332
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]11J-2
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]11J-2
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]328
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]12J-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]12J-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-05-02
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]226
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]1K-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]1K-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-11-07
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]51
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]10L-1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]10L-1
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-07-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]182
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]10L-2
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]10L-2
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-09-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]111
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]10L-3
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]10L-3
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-11-02
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]55
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]10L-4
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]10L-4
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-15
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]11
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Buckland Power Borehole
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Buckland Power Borehole
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]19H-2
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]19H-2
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Buckland Materials Borehole
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Buckland Materials Borehole
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]7B
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]7B
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]3L-3
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]3L-3
Description [§98.326(r)]in-mine gob drainage well or system
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-01-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2022-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]


VentilationQuarterlyDetails:


VentilationMonitoringQuarterlyRowDetails:
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 East Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]105376
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 East Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-01-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.005
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 East Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-01-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]485.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0119909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-114.2086106
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]200340
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-01-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.08
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-01-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]485.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0119909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1432.2127307
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 South Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]127368
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-01-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.005
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-01-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]485.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0119909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-117.1739515
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #1 North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]460641
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-03
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.02
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-03
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0076462
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1242.8788148
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #4 Lone Oak West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]644478
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #4 Lone Oak West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.03
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #4 Lone Oak West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]484.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0079804
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1520.4030765
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #3 Irish Ridge West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]696790
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #3 Irish Ridge West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.02
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #3 Irish Ridge West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]483.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0079804
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1375.8714996
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]66992
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-09
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]1.06
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-09
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]481.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11906.6707517
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]60539
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-09
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]1.26
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-09
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]481.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12048.1071973
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan South Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]40571
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-09
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]1.99
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-09
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]481.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12167.7823928
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]83939
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-23
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.06
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-23
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]500.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1130.0948083
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]128147
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-23
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.47
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-23
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]500.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11555.7908956
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder South Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]4718
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-23
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-23
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]500.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-124.3743395
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]204640
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-24
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.07
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-24
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]497.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0791673
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1402.0133317
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]199955
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-24
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.16
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-24
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]497.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0791673
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1897.8507288
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 South Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]299388
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-02-24
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.14
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-02-24
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]497.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0791673
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11176.2897514
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]97541
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-03-10
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.68
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-03-10
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11750.3498827
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]99160
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-03-10
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.73
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-03-10
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11910.2419559
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder South Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]21267
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-03-10
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.47
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-03-10
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1263.7745483
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 North Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]336312
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-03-22
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.12
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-03-22
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]509.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11023.3880359
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 West Leg
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-01-01
Stop date2022-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]311792
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-03-22
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.31
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-03-22
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]509.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12451.0001438
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]98880
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-14
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.6
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-14
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11583.024218
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder South Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]21267
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-14
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.46
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-14
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1261.0308994
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]105994
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-14
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.63
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-14
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11781.7619618
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder South Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]4809
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-27
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.21
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-27
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]511.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9959488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-125.7231819
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]140678
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-27
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.45
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-27
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]511.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9959488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11612.4609173
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]82426
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-27
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.08
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-27
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]511.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9959488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1167.9595493
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 East Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]96880
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 East Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-28
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.005
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 East Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-28
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]497.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0119909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-112.8896977
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]186300
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-28
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-28
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]497.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0119909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-149.5737134
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 South Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]122844
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-04-28
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.005
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-04-28
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]497.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0119909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-116.344158
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #4 Lone Oak West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]644245
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #4 Lone Oak West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.04
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #4 Lone Oak West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]529.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0012962
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1637.4874943
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #3 Irish Ridge West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]744875
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #3 Irish Ridge West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #3 Irish Ridge West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]529.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0012962
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1184.2654958
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]39037
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-03
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.9
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-03
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]527.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.991604
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1863.969229
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]71630
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-03
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]1.42
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-03
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]527.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.991604
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12501.2818191
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan South Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]43999
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-03
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.58
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-03
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]527.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.991604
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1627.5525994
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]313040
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-11
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.02
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-11
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]529.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0133278
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1156.7392773
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #1 North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]472990
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-05-19
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-05-19
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]529.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0133278
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1118.4131593
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 South Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]271572
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-06-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.12
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-06-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.002633
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1792.2885995
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]173760
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-06-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-06-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.002633
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1422.4418874
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 West Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]156890
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-06-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.14
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-06-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.002633
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1533.9990262
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 North Leg
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-04-01
Stop date2022-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]304128
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-06-23
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.08
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-06-23
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]512.17
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.002633
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2184
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1623.2721254
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]51289
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-09-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.49
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-09-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]522.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0021317
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1637.4812415
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan South Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]42605
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-09-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.49
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-09-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]522.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0021317
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1529.5460741
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]63510
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-09-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.71
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-09-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]522.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0021317
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11143.7933427
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]1K Bleeder Shaft North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-08-28
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]25029
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]1K Bleeder Shaft North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-09-12
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.12
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]1K Bleeder Shaft North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-09-12
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]531.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-127.600406
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]1K Bleeder Shaft East Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-08-28
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]48517
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]1K Bleeder Shaft East Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-09-12
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.67
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]1K Bleeder Shaft East Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-09-12
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]531.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1298.7166918
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]1K Bleeder Shaft South Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-08-28
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]77748
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]1K Bleeder Shaft South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-09-12
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.44
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]1K Bleeder Shaft South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-09-12
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]531.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1314.3638869
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 South Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]126498
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-21
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.16
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-21
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1490.9320662
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 East Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]100340
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 East Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-21
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.05
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 East Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-21
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1121.6919533
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]210600
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-21
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.06
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-21
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1306.4978118
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]172000
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-27
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.09
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-27
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0046383
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1381.2433519
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]164720
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-27
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.16
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-27
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0046383
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1649.0791207
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 South Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]282430
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-27
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.14
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-27
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0046383
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1973.8009292
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]335880
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-28
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.08
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-28
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]512.17
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.002633
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1695.9080704
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]336544
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-07-28
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.21
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-07-28
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]522.17
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0099856
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11808.4825182
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]104030
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.84
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12357.2854221
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]141772
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.97
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13709.6803286
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder South Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]23300
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.77
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1483.9727752
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #1 North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]492795
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-19
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.005
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-19
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0059751
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-160.7638299
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #4 Lone Oak West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]655662
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #4 Lone Oak West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-22
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.05
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #4 Lone Oak West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-22
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1812.11782
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #3 Irish Ridge West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]722160
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #3 Irish Ridge West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-22
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #3 Irish Ridge West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-22
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1178.8967501
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder South Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]4736
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-31
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.21
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-31
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.032712
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-125.4616873
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder West Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]136114
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-31
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.4
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-31
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.032712
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11393.8598259
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder North Leg
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-07-01
Stop date2022-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]75553
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-08-31
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.08
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-08-31
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.032712
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1154.7383756
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]61299
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-31
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.53
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-31
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]517.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0126593
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1840.7938287
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan South Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]44639
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-31
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.41
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-31
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]517.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0126593
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1473.6511265
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]9J Bleeder Fan West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]60539
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]9J Bleeder Fan West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-31
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.7
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]9J Bleeder Fan West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-31
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]517.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0126593
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11096.7143779
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]1K Bleeder Shaft North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]23220
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]1K Bleeder Shaft North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]1K Bleeder Shaft North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]509.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.013662
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-161.0964783
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]1K Bleeder Shaft East Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]49248
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]1K Bleeder Shaft East Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.44
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]1K Bleeder Shaft East Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]509.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.013662
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1570.1580229
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]1K Bleeder Shaft South Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]81664
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]1K Bleeder Shaft South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.38
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]1K Bleeder Shaft South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]509.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.013662
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1816.5225992
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]116390
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.86
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12700.153198
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]133330
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]1.03
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13704.583514
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]7L Bleeder South Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]23300
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]7L Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.69
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]7L Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0086488
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1433.6898895
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 South Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]115710
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-13
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.22
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-13
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1617.4635641
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 East Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]93420
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 East Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-13
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.07
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 East Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-13
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1158.6191667
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4South #1 North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]198360
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-13
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.04
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-13
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9986225
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1192.4561758
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 South Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]275842
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.15
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]507.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11077.4868123
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]180380
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.18
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]507.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1845.5147709
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #2 North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]180800
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #2 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.06
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #2 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]507.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.9992909
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1282.4944942
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]323568
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-21
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-21
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]514.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0066435
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-183.7263738
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]6 South #1 West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]332176
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]6 South #1 West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-10-21
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]6 South #1 West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-10-21
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]514.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0066435
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-185.9537743
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder South Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]4819
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder South Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.18
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder South Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]507.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0093172
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-122.8152676
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]136114
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.4
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]507.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0093172
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11432.0522175
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]4J Bleeder North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]79578
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]4J Bleeder North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.07
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]4J Bleeder North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]507.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0093172
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1146.5166919
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #4 Lone Oak West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]630265
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #4 Lone Oak West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #4 Lone Oak West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0093172
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1157.6986468
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #3 Irish Ridge West Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]728060
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #3 Irish Ridge West Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.02
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #3 Irish Ridge West Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]2208
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0093172
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1364.3358803
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]5 South #1 North Leg
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2022-10-01
Stop date2022-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]427555
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]5 South #1 North Leg
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2022-11-09
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.01
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]5 South #1 North Leg
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2022-11-09
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]519.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0059751
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1109.4968088
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]


DegasQuarterlyDetails:


DegasQuarterlyGasCollectionRowDetails:
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-1
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98.7692308
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]488.3623077
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.000126
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]99.5384615
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]514.67
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0010514
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]92.1538462
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]527.9007692
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9993035
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]86.1923077
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]499.8623077
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9915661
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-2
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]488.3623077
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9953962
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-2
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]100
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]515.9392308
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9933141
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-2
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]81.8461538
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]527.9007692
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9906664
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-2
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]73
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]499.2853846
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9835331
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-3
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-02-21
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]96.1666667
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]495.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0008458
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-3
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]100
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]514.3623077
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0002032
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-3
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]83.6923077
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]527.7084615
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9994705
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-3
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]72.8461538
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]498.2084615
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9925943
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-4
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-03-28
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]100
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]484.67
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9971699
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-4
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]100
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]513.5161538
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9975555
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-4
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]100
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]526.8238462
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9956019
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab9L-4
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98.1538462
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]495.0930769
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9889827
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab12J-1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-05-02
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]100
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]517.2811111
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9981724
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab12J-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]94.2307692
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]530.5930769
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.995936
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab12J-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]68.6153846
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]502.2469231
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9887513
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-1
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]77.3846154
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]487.2084615
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9979925
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]81.3076923
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]513.7853846
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9935711
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]83.1538462
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]526.2084615
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9956533
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]67.1538462
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]495.0546154
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9885328
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-1
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]0
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]486.5161538
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0067581
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]5
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]510.9007692
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0060383
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]7.4615385
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]530.2084615
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.003879
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]0
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]501.6315385
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9981082
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-2
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]4.1538462
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]488.5546154
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.000216
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-2
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]0
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]511.2853846
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9979668
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-2
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]0
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]529.5930769
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9965016
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-2
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]0
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]502.0930769
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9862065
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-1
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]28.6923077
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]491.0546154
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0006916
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]80.6923077
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]512.9776923
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9988665
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]44.5384615
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]530.1315385
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9976583
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10-J-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]0
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]502.0930769
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9907692
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10L-4
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-12-15
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98.25
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]492.67
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9545629
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-3
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]96.7692308
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]487.1315385
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0010257
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-3
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]99.2307692
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]513.9776923
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9990978
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-3
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]99.3076923
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]528.2853846
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9993549
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab8L-3
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]94.0384615
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]496.7469231
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9922087
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab1K-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-11-07
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98.125
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]499.295
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9896093
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10L-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]99.025641
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]525.5417949
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9995948
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10L-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]97.0769231
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]492.67
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9928
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10L-2
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-09-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]97.5
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]523.045
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9952902
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10L-2
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98.5769231
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]502.67
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9903322
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab10L-3
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-11-02
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]95.4166667
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]497.6075
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9771265
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7L-1
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]84.5384615
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]487.7469231
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0031336
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7L-1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]90.5384615
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]513.9776923
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0018226
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7L-1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]91.3846154
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]526.67
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9972213
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7L-1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]87.0769231
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]493.1315385
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.992967
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-2
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]82.3846154
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]487.5161538
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1.0013085
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-2
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]71.2307692
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]511.5161538
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9991235
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-2
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]71.2307692
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]529.9776923
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9973241
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab11J-2
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]57.6923077
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]168
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]503.4776923
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]0.9910391
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]168
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a wet basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter did not automatically correct for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Power Borehole
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]44.4751795
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Power Borehole
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]44.5879934
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Power Borehole
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]45.1989284
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Power Borehole
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]41.5412794
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab19H-2
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]72.742498
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab19H-2
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]73.3022722
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab19H-2
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]74.2250092
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab19H-2
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]73.518249
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Materials Borehole
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]43.3606497
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Materials Borehole
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]45.4985096
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Materials Borehole
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]45.1792158
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBuckland Materials Borehole
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]41.3112761
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7B
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]47.6898672
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7B
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]50.4455151
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7B
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]51.8060603
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab7B
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]48.4558649
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab3L-3
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-01-01
Stop date2022-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]66.6977992
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab3L-3
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-04-01
Stop date2022-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]71.5824908
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab3L-3
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-07-01
Stop date2022-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]67.593509
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab3L-3
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2022-10-01
Stop date2022-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]73.416548
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0


DegasWeeklyDetails:


DegasWeeklyGasCollectionRowDetails:
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3161
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.4497978
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3400
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3162.7076434
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3414
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3135.3564785
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3435
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-395.8391158
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3181
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3121.4340778
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3647
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3154.5984983
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2658
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3111.4153176
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3196
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3124.5693267
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3211
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3131.2910849
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3290
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3121.9809889
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3101
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3115.3289141
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3081
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3118.5980326
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2889
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-367.5905671
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2801
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3113.806913
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2821
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3111.1527264
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2890
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-397.1294594
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2812
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3107.4890423
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2804
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3101.8717871
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2603
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.4544274
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2732
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3103.4303289
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2811
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3108.7964373
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3005
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.1327942
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3014
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3121.9210146
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3100
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3116.4335601
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3149
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.1335475
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2400
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.9292527
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3136
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-323.8633526
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3101
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.4488838
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2975
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.595398
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2378
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.3474953
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2632
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.9493346
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2611
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-313.7060157
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2228
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.9025838
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2181
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.2307483
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2101
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-316.4978639
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3146
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.5154377
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3100
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3128.1699155
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2948
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.8902797
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2890
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3110.1895744
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2748
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-383.3262205
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2817
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3113.6527767
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2949
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3114.4686513
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2551
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-316.7263287
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2209.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.0153719
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1930
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.633329
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2323
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.7764
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2063
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.5744307
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2012
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.8487106
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2019
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-367.7658608
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2026
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-374.9989767
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2009
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.7051905
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2893
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.3570365
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2867
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.7307469
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3146
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-379.9437933
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3210
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-319.8620799
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3325
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-31.385442
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3753
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.7943689
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3421
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.0397451
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3360
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.9187682
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3309
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-323.1975327
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3300
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-37.6047933
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3271
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-321.266658
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3200
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3129.252195
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3785
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3157.5193064
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3620
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.4731984
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3581
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3139.5832199
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3302
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3131.3463812
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3507
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3132.8386087
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3489
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3133.8656975
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3772.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3118.1925719
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3600
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-370.5496142
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3580
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-379.9716747
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3779
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-339.2830925
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3790
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-375.9467388
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3711
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3137.279287
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3691
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.0932464
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2928
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.6088765
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3064
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.9533754
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-398.2491596
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2954
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3110.1454876
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2136
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-346.8157316
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2536
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.9634702
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2491
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.7969011
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2814
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.0030232
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2789
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-310.1166139
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2702
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-313.489942
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3021
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-313.8178701
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2979
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-312.8522026
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2902
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-35.3248853
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2871
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-33.8321502
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-32.5410437
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2743
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-32.6424041
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2499
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30.8359255
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2642
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-319.5236324
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2382
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.2071968
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2184
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-377.4392924
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1906
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-365.0759321
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2194
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.2630945
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1229
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.1278249
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1789
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-318.1220054
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1642
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.8012274
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1495
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.9344589
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-2
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1717
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.486085
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4936
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-321.1790063
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4881
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3169.9773548
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4701
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3174.7699057
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4686
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3192.4825241
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4486
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3183.3737262
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1625
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-366.6406384
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1611
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.3317334
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1821
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.4737808
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1959
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-377.7190595
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1586
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.271968
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1590
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.3185384
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1507
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.487226
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1592
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.2362927
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1602
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.0319035
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2429
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-379.8427585
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2441
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3101.6003231
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2392
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-389.3461521
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2409
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-392.3662159
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1575
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.1448045
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1983
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.0249094
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1909
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-379.0801612
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1363.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.9795876
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1530
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.3082469
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1296
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.3575629
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1239
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.8600008
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1443
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-344.7004899
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1402
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.7580283
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1381
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.5088672
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1464
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.9128336
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2801
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-393.185258
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2749
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.1147797
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2701
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.3475376
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2801
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-377.4379324
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2781
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-379.8548174
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-396.1998426
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1011
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.8401895
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.9793032
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1080
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.8421038
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]972
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.3837165
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1010
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.9232868
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]754
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-36.5953648
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]885
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-31.5484452
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]596
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-39.3483409
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]307
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-34.4464548
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-3
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]554
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-322.7696149
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.9699272
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3278.9135031
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3278.5168947
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3278.1945199
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3266.1361669
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3271.0591488
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3275.8166086
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3264.2592789
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3270.289696
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3229.1762171
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]7000
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3286.4193012
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3884
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3140.9212254
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3741
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3143.0166876
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3486
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3128.2282765
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3700
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3122.5489811
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3681
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3150.6457058
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3612
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3133.4197897
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3047
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3108.0563569
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2276
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-386.0556699
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2204
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-381.2955255
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2746
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3103.9543302
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2719
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3101.4232749
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2731
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3103.0444055
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2893
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-394.7085767
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2880
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3119.9210269
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2346
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-387.1336458
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2355
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-389.3744875
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2339
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-391.4639913
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2301
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-391.7602002
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2411
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-392.6569514
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1850
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-374.885653
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2028
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-378.1112368
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2738
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3108.1925965
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3036
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-366.3133105
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3139
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3117.3390623
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3326
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3131.0629673
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3215
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3117.7382976
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3193
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3115.4619173
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3171
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3112.4272387
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -9L-4
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2875
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3211.4949844
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4721
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-326.3206391
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2979
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3115.8163654
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3118
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.0301134
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3221
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3126.1868853
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4800
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3157.7461713
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4821
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3184.6259709
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4790
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3187.4503092
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4711
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3177.5594606
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2375
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-393.895438
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4665
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3158.9088756
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3176.1007045
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2496
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-398.7882762
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1958
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.3321457
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2132
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-378.4677045
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2169
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.4226468
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2428
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-390.4736636
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2489
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-392.1777694
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2411
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-389.3610676
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4739
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3113.0386315
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2341
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.3002143
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2239
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.3430458
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2204
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.5159364
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2181
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.6504811
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2109
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.1962586
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2041
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.1075477
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3987
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3101.0399147
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3826
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-386.2475085
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3300
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-387.5905164
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2543
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.3684306
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2587
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-367.4347309
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3225
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-376.0373524
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2497
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-344.4830377
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2438.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-368.8085329
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2380
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.6466624
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -12J-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1739
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.0466366
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1361
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-312.1681194
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1307
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-317.638765
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1300
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-313.680475
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1368
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.349876
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1410
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-39.0691799
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1975
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-345.5695349
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1303
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-36.3969969
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1586
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-316.0960508
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1381
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-33.7258498
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1411
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.7773643
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1381
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.1638366
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1290
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.0586976
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1543
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.483475
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1492
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-324.6539717
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1504
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-34.4315703
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2055
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-369.3610016
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1311
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1204
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-35.2706605
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1464
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.8974344
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1510
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-316.5478117
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1620
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.3657095
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2788
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.7509064
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2711
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-38.4335316
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2694
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-383.8957382
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2714
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.1524778
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1407
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-34.374544
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2355
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-35.7972918
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2311
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-35.6940944
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2300
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.1404417
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1514
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-35.171376
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2214
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-33.4134941
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2181
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-31.9305065
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2057
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-32.2364405
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2003
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-32.898423
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1981
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30.070249
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2577
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-310.8217814
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2502
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-31.4496528
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2411
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-31.6322927
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2379
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-32.4195647
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2191
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-313.4115384
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2001
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30.1137355
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1931
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30.3516928
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]950
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-343.2725953
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1640
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-340.8326622
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1223
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.6060069
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1157
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.4833805
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1067
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-324.2921322
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1212
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.3040386
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1025
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-319.21278
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1499.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-34.9982925
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1974
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-36.4251398
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]393
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-37.2804009
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3021
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2657
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.814635
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3800
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-32.0193404
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2245
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30.2466144
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2235.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.0920484
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-2
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1215.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.7660537
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1307
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.961011
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1436
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.170526
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1561
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-346.8032619
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1549
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-313.917134
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1143
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-311.3025733
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2086
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-368.5596954
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2101
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-382.975108
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2008
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.6134137
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1991
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.3055559
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1910
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.9026204
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2029
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.3676539
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2141
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-383.9477163
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1975
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-346.6550923
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2001
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.7557381
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1979
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.1245102
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2091
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-378.7476953
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2001
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.9738198
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2144
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.0182365
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2100
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.3495512
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2004
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.7545931
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1646
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.0398678
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1546
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.9563495
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1551
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.681345
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1529
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.1030239
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1501
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.6953805
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1520
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.4157931
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1923
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-315.9020985
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10-J-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-4
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4134
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3112.7982841
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-4
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2935
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-395.1397971
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]494
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-38.3701113
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]599
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-322.9850245
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]716
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.257116
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]702
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.9872483
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]721
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-324.7456782
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]523
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-311.8622936
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]772
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.2352004
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]742
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.079588
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]750
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.7371439
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]810
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.2511741
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]901
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.0931336
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]983
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-340.3101013
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]617
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-39.4825092
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]600
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-323.951672
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]621
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-324.6839774
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]690
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.2826949
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]535
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.2907781
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]509
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-317.7269839
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]542
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-321.3793155
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]590
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-322.3029654
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]610
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-323.5904579
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]758
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.0257038
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]761
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.7591859
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]770
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.6130807
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]811
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.1035569
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]552
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.6917858
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]874
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.9015804
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]890
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.7433923
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1110
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-35.0433662
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1334
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-339.7061726
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1292
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.2914191
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1244
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-36.7117187
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1431
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.1054573
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.3181969
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1400
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.8061866
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1470
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.3825919
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1451
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.3822858
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1357
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.9419083
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1337
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.5255166
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1200
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.6251874
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1199
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.1043242
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1121
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.5347587
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1429
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.120439
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1460
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.3540751
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1418
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.2720568
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1577
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.809932
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1422
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.9910233
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1352
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.7319746
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1375
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.8198566
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1304.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.9703904
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1234
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.5312146
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -8L-3
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1159
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.2255388
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4653
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.1729868
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]5689
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3210.730506
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4355
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3163.388283
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3851
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3141.9676311
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3931
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3145.0014236
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3306.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3124.9336607
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2682
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3104.4909774
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -1K-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3803
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3192.6723147
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]5056.3333333
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-383.399597
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]6501
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3237.7673304
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]6100
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3226.8026327
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4446
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3125.4248899
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3518
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3133.2692365
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3490
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3131.7202357
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3321
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3126.441117
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3301
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3123.293458
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3289
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3124.1130544
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4624
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3138.1827621
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4531
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3191.8869191
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4510
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3169.688271
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4500
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3171.8652853
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4481
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3173.4552313
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4409
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3181.1588589
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4306
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3166.128522
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3493
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3138.2376863
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4614
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3180.2839207
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4490
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3177.2659904
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4266
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3163.5329053
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3828
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3155.0241794
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4279
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3161.4428994
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3989
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3150.0382589
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3848
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3142.1387579
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3707
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3133.6147595
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3704
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3244.6426471
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]6854
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3107.963337
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4488
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3152.2184472
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4181
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3156.1796719
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4098
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3155.0695003
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3162.882728
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4100
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3165.741242
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4013
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3154.0643242
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2435
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-393.9561797
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2324
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-387.3661961
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2373
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-393.7105542
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2061
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-375.9779633
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2326
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.1666631
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1997
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-377.0747756
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2039
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.192432
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2054.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-376.0890765
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2070
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-376.9982133
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-2
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1787
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-383.4298113
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2880.8333333
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.148127
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3038
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3102.7621103
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1768
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-365.0673853
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1669
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.1633387
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1821
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-369.1839948
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1555
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.0025922
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1289
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-345.2908815
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -10L-3
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1346
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.1638406
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1489
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-321.7115721
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1118
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-343.8804085
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2936
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.5451382
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1486
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.4574379
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1490
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.1044039
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2936
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3120.9727293
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1753
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1508
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.3807577
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1481
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.0622793
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1541
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.9048167
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1554
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.1510689
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1601
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.911393
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]764
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.5617467
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]760
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-320.7845909
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]781
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-326.6477053
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.4838502
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]781
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-315.944337
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]749
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-319.9731164
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1769
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-366.0053621
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1841
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-370.0804097
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-369.5178998
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1996
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.2719835
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1999
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-378.8039282
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1849
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-369.2565345
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1790
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.6735125
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1639
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.2265815
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2049
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.9877045
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2003
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.8815477
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1948
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.4118157
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1514
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.7119847
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1269
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-346.2742969
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1260
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-342.5417121
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1511
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.368577
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1496
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.7236909
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1449
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.9765161
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1602
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.0632947
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1590
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-367.0475562
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1499
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.9633034
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1458
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.8202261
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.515057
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1429
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-345.9888992
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1438
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-342.1037899
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]908
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.21991
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]825
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.4505231
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1032
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-340.2386585
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]934
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.0822116
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]670
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.7053149
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1281
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.3074196
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1321
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.7071203
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1262.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.4607295
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1204
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-344.6583132
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7L-1
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]0
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-30
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3021
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-343.4499156
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]4046
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-380.6813469
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3275
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3109.1883895
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3290
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.5163113
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3201
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3135.3221532
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3568
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3140.03259
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2864
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-394.1468027
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2875
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-384.7138648
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2890
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-398.4663196
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2308
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-376.7413574
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2211
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.3799044
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2241
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.0178686
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-339.9067003
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1792
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-342.9912673
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-343.1796892
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1994
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.1397849
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2950
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.0191537
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2900
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-379.3472343
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2831
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.3478212
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2884
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-374.1074098
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2904
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-372.9628478
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3472
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3116.461139
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3417
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3102.3351005
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3329
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3100.6282567
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]3105
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-368.8693382
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2578
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-367.2189035
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2872
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-373.4616611
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2811
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-382.7500243
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2842
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-366.9223145
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1996
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-38.5105686
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2001
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.6158833
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1990
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.453095
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1841
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-345.7146851
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1821
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-343.8535229
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]1809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-340.3080391
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2973
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.5591469
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2391
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.1655096
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2889
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-371.9245794
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2801
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-394.2742342
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2749
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-365.1551109
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2589
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.5945606
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2501
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-317.1289982
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2550
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.6897482
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2665
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-317.5161963
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2369
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.5807238
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2624
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.878544
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2246
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-342.83987
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2518
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.4642484
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2507
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-343.741553
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2453.5
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]168
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.0033564
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2400
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.4379047
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -11J-2
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]2313
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]acfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-344.4114566
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]594.7579267
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.962023
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]535.4974126
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-347.1832023
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]632.2486365
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.8914334
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]572.4369722
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.8779588
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]509.4790361
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-344.1847083
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]606.9843941
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.2295583
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]588.8912652
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.4230745
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]589.1653657
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.0449746
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]559.3962042
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.6745293
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]574.7286766
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.4486463
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]588.9710542
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.4720443
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]584.4707633
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.6052982
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]477.7095456
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-345.2196033
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]579.6482942
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.3294055
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]571.2219744
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.1793887
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]565.51219
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.2711903
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]682.0772848
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.0291366
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]734.3109627
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.5825622
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]673.0330053
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.0770828
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]699.3163718
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.8892845
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]624.5562882
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.6400854
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]593.2719674
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.878365
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]677.7641368
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.8713339
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]690.9840323
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.772195
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]696.9984021
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.9308436
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]608.0548226
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.0316153
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]624.4023045
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.3724476
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]617.786704
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.3162003
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]696.4219647
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.718826
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]686.6826081
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.7842214
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]658.0091769
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.9965944
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]715.05963
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.8592473
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]603.3552709
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.0389764
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]700.1679463
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.830983
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]542.2225836
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.9883947
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]559.5619434
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.852115
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]675.0132185
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.7856108
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]698.5026552
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.9167223
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]676.689983
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.1353565
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]720.7080491
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.775633
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]652.1594514
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.244999
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]673.2138117
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.0865679
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]708.4264682
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.7825653
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]741.1262741
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.5221662
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]623.4926487
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.3361491
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]743.0748783
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.2237049
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]736.6049154
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.9789376
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]726.9386026
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.7550734
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]677.3791347
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.0724979
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]760.1052875
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-362.7580676
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]702.8022252
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.9115191
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Power Borehole
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]399.5637288
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-342.9612732
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]103.3318378
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-317.1750277
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]153.7243756
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.7577088
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]159.6708579
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.908819
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]151.8235446
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.3897491
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]156.5430343
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.3033401
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]144.9447858
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.0581704
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]151.3518958
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.2984481
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]150.3045492
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.0957045
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]161.6494188
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.2918255
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]161.8474328
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.3301567
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]159.2968113
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.8364117
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]165.155526
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.9705319
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]161.4855238
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.213581
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]157.81153
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.5488934
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]154.8917691
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.9836909
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]145.3190049
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.1306112
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]147.6764008
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.5869519
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]161.337416
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.2314285
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]152.184361
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.4595954
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]162.6692122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.4892354
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]148.633491
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.7722239
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]157.3112907
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.4520579
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]158.8964087
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.7589024
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]123.187857
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-323.8465004
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]140.9681689
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.2883836
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]150.8352806
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.1984426
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]157.0957882
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.7094223
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]159.8756219
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.9484569
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]149.5171577
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.9432826
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]151.6251803
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.3513501
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]155.8928236
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.1774734
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]153.9713069
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.8055094
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]158.7117273
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.7231521
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]130.6231902
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.2858198
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]134.8276227
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-326.0997069
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]149.9954783
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.0358751
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]151.7740277
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.3801637
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]158.7670406
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.7338595
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]155.6467726
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.1746793
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]153.1809552
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.4605667
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]155.0811169
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.0203446
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]162.2028793
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.3989635
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]139.8999923
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.0816077
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]144.005442
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.8763338
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]142.0756107
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.5027603
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]134.5660694
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-326.0490758
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]145.4090193
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.148036
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]154.0600214
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.8226826
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]147.7996238
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.6108052
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]153.540469
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.7221085
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]146.7220576
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.4022118
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -19H-2
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]117.5540143
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.2237362
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]592.412386
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.6500017
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]549.5259585
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.0966249
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]651.5279282
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.4844927
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]435.023713
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.6011557
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]488.9764684
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.8942472
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]630.5656356
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.6434331
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]575.2986024
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-351.196222
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]569.9673522
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.1159693
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]581.5123644
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.1238024
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]593.5574997
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.9147735
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]518.7774141
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-346.7675449
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]526.6926169
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.5288299
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]539.4028153
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-350.5209164
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]571.3700623
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.6881539
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]528.7429978
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.5200748
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]647.5859123
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.153168
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]711.8740111
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.1765837
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]642.3929243
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.2121869
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]684.1768531
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.8220289
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]697.1648859
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.4773224
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]646.2052629
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.1120329
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]644.1454358
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.6766474
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]646.4236206
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.7889165
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]683.7870184
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-363.2047093
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]722.1594809
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.1620794
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]743.207242
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-365.0025699
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]644.0666164
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.4682756
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]704.2908271
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-364.2323368
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]657.5602998
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.9592347
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]659.294795
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.0614065
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]675.4615116
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.509877
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]690.0014812
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-361.5498224
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]667.0188983
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.4281545
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]535.1758183
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.7261772
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]484.9762131
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-344.6400271
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]628.3513405
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.9575485
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]617.3012247
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.9004267
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]579.626073
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.5244072
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]577.8608731
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.2610241
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]555.7014652
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.6567776
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]680.8092744
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-358.3067787
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]632.5520976
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.7288172
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]652.1269226
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.7883031
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]684.2042573
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.6572748
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]663.9033157
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.7638023
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]687.5863922
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.2450822
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]615.0385889
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-346.3069886
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]546.8480549
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-345.7770592
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]606.195074
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-348.9816559
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]669.0944788
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.2713726
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]626.2539914
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.1783737
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Buckland Materials Borehole
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]334.0326562
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.5858693
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]121.1804663
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-310.7472659
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]274.5226924
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.5885861
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]291.6794646
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.9320244
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]292.8029204
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.7268673
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]282.1475157
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.0411175
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]290.8619081
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.8853152
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]278.9502022
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.2020218
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]259.3870427
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-326.2618669
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]297.2162244
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.4041362
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]309.0427831
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.6390506
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]300.183909
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.3276657
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]323.2097371
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.5144638
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]300.7370069
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.8737964
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]315.1019602
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.0959083
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]325.7678477
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.6360753
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]297.688812
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.7676718
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]273.0347913
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-324.5414582
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]287.6339347
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.7347207
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]322.2758478
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.7841988
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]331.3708185
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.6320819
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]321.5414091
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.4693362
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]331.2740059
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.4433381
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]235.791537
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-326.1541489
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]266.1879877
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.5528044
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]270.0557479
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.3513971
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]293.1767535
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.3942478
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]311.5925187
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.0597644
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]334.3065875
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.971822
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]322.2785634
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.2437227
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]279.0317871
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.8788573
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]271.2530213
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.5525829
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]309.4121048
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.3010652
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]322.7087963
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.5369829
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]305.7739588
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.5275354
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]274.1215427
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.0581922
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]316.6079945
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.8032488
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]320.9917628
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.1649796
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]286.9534869
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.3521829
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]299.9905563
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.8721495
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]296.224081
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-323.5154613
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]298.9207312
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-327.0436865
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]308.2311834
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.7503109
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]310.1679032
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.236195
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]298.3130936
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.0479871
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]305.110593
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-329.5401892
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]333.1708531
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-335.5927089
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]317.4233756
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-330.2046151
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]188.3477119
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-321.2390575
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]290.6893361
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.1696079
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]319.4950287
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.7550467
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]331.998794
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.4513455
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -7B
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]191.6749968
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-325.2642726
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]304.4605606
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.022713
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]302.9497923
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.5317654
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]267.724974
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-337.4153106
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]228.9245269
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-331.987745
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]273.6962007
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.2883138
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]258.031914
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-336.1861165
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]244.9214455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.343857
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]230.2395201
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.3659094
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]230.889527
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.569087
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]199.84031
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-328.4505885
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]234.5494999
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-333.4581366
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]295.969749
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.7426771
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter1
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]286.554262
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-340.4397097
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]275.4982063
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.9816803
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]285.0562892
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-340.46892
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]279.6087501
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-339.6606297
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]297.1131192
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.9075663
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]300.392178
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-342.5015256
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]291.751574
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.4009278
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]278.5071359
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-339.8604927
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]288.4414755
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.3705629
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]268.4352642
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-338.8202295
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]234.204093
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.2598854
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]284.7302273
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.5111164
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]387.3479084
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.9591139
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter2
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]291.1101082
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-341.9391475
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]188.8918973
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-332.3828023
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]397.5902206
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.9688441
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]384.4142419
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.7753073
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]396.6455126
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.5258572
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]379.4069804
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.2048652
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]364.6730206
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.0138495
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]366.2592381
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-353.6691506
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]394.5002901
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.663297
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]377.8713665
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.274823
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]384.901736
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-356.529282
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]411.4838771
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.443875
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]337.4956081
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-349.8775188
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter3
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]405.6457854
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.0501541
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]413.2932791
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-352.4391501
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]397.9696601
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.0314361
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]405.4779315
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.1990964
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]404.0460653
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.7604738
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]407.6993661
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.4161001
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]406.0262493
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-360.0551122
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]398.0417695
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.0911164
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]388.478416
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-357.6590997
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]373.6532353
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-355.284455
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]402.5710998
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.289579
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]405.1163624
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-359.5626135
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]373.179728
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-354.4799698
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -3L-3
Quarter4
Week13
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(1)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]185.7079321
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-334.6961409


DestructionOrOffsiteDetails:


DestructionOrOffsiteBackupDevicesRowDetails:
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Engine
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]6777
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]100
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]9L-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]9L-2
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]8L-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]10-J-2
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Engine
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]8028
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]100
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]10-J-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]8L-3
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]9L-3
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]9L-4
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Engine
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]7956
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]100
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]11J-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]7L-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]11J-2
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]12J-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Engine
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]4356
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]100
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]1K-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]10L-1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]10L-2
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]10L-3
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]10L-4
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 001
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Flare
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]8760
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]99
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]Buckland Power Borehole
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 002
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Flare
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]8760
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]99
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]19H-2
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 003
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Flare
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]8760
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]99
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]Buckland Materials Borehole
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 004
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Flare
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]8760
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]99
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]7B
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 005
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Destruction occurs at the coal mine
Description of the Device [§98.326(p)]Flare
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]No
Annual operating hours of primary destruction device (hours) [§98.326(p)]8760
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]99
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]3L-3
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]


DestructionOrOffsiteQuarterlyDetails:


DestructionOrOffsiteQuarterlyBasisRowDetails:
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]118.5925815
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]138.1171817
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]77.8620185
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]117.9099175
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]107.9267
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]281.8297365
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]227.2785879
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]183.5196826
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]101.3529609
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]160.5200584
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]186.4385497
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]146.5150588
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]89.2945936
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]223.6236564
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 001
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]665.494884
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 001
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]742.977664
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 001
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]772.7897387
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 001
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]752.8050626
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 002
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]376.8231799
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 002
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]375.9494482
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 002
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]381.5150635
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 002
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]365.6260403
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 003
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]642.0526336
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 003
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]753.3865094
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 003
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]739.7465309
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 003
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]663.5456737
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 004
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]366.4427359
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 004
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]395.5618134
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 004
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]418.0998551
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 004
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]386.9023794
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 005
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]460.1539103
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 005
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]533.25538
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 005
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]698.3258297
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]MECS 005
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]724.6446995
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]


DestructionOrOffsiteWeeklyDetails:


DestructionOrOffsiteWeeklyBasisRowDetails:
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]58
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]63
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]72.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]74.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]88.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]65.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]63.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter1
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]60.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]74.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter2
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]58.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]56.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]65.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]55.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]70.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]58
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]71.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]59.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter3
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]55
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]52
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]49.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]47.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]60.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]36.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]63.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]60.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]51.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]48.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64.125
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]672
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 1
Quarter4
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]73.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]39.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]86.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]84
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]92
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]93.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]66.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]82.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter1
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]93.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]95
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]90.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]92.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]93
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]93
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]92.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]93
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter2
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]92.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]89.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]91.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]91
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]85.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]84.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]83
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]85
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]83.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]81.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]85.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]70
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter3
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]65.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]62.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.8
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]56.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]70.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]68
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]66.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]65
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]63.375
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]672
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]61.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 2
Quarter4
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]70
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]57
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]56
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]57.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]58.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]59.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]58.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]51.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]51.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]48.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]59.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]60.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]54.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter1
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]46.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]48.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]60.6666667
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]62
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]59.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]66.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]68.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]70.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]66.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter2
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]68.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]76.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]84.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]69
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]67
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]64.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]63.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]57.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]65
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]65
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]55.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter3
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]56.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]54
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]50.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]48.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]57
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]59
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]56.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]55.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]57.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]54.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]59.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]57.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]672
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]55
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 3
Quarter4
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]28.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]96.3333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]90.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter3
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]100
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]94.8333333
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]92.25
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]97.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]96.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98.75
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]97.625
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]672
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]96.5
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]Device 4
Quarter4
Week13
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]30
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]99
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0


EmissionsSummaryFFDetails:


TotalResultForMethaneLiberatedFromVentilationSystemsRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 19310.48 N
QuarterQuarter 2 (Apr-Jun)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 12972.48 N
QuarterQuarter 3 (Jul-Sep)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 17555.91 N
QuarterQuarter 4 (Oct-Dec)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 16273.99 N


TotalResultForMethaneLiberatedFromMonitoringPointsRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 8056.25 N
QuarterQuarter 2 (Apr-Jun)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 13405.75 N
QuarterQuarter 3 (Jul-Sep)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 12548.79 N
QuarterQuarter 4 (Oct-Dec)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 14347.23 N


TotalQuarterlyMethaneDestroyedAtMineTransportedOffsiteRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 2838.84 N
QuarterQuarter 2 (Apr-Jun)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 3381.6 N
QuarterQuarter 3 (Jul-Sep)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 3591.35 N
QuarterQuarter 4 (Oct-Dec)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 3565.09 N


TotalQuarterlyNetMethaneEmissionsRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]19310.48
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]8056.25
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]2838.84
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]24527.89
QuarterQuarter 2 (Apr-Jun)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]12972.48
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]13405.75
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]3381.6
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]22996.63
QuarterQuarter 3 (Jul-Sep)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]17555.91
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]12548.79
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]3591.35
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]26513.35
QuarterQuarter 4 (Oct-Dec)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]16273.99
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]14347.23
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]3565.09
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]27056.13