GHG Summary Report

CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):587,281.4
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):1,024,783.8
Cogeneration Unit Emissions Indicator:Y
GHG Report Start Date:2020-01-01
GHG Report End Date:2020-12-31
Description of Changes to Calculation Methodology:
Plant Code Indicator:Y
Primary NAICS Code:322130
Second Primary NAICS Code:

Parent Company Details:

Parent Company Name:WESTROCK CO
Address:1000 Abernathy Road NE, Atlanta, GA 30328
Percent Ownership Interest:100

Subpart C: General Stationary Fuel Combustion

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	365,911.9 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	322,041.8 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	33.89 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	13.067 (Metric Tons)
Own Result?

Unit Details:

Unit Name : GP-01
Unit Type : OCS (Other combustion source)
Unit Description :
Other Unit Name :

Small Unit Aggregation Details:
Use Ivt Indicator: Y
Highest Maximum Rated Heat Input Capacity: 5.1
Cumulative Maximum Rated Heat Input Capacity:

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)
Annual Fossil fuel based CO2 Emissions: 1.9 (metric tons)

Tier Fuel Details:

Fuel : Distillate Fuel Oil No. 2
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
1.9 (Metric Tons)	0.00 (Metric Tons)	0.000 (Metric Tons)	0 (Metric Tons)	0 (Metric Tons)

Unit Name : PB8
Unit Type : PCT (Pulverized coal, tangentially-fired)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 586.2 (mmBtu/hr)

Plant Code : 10017 (numeric, maximum of 6 digits)

Emission Details:
Annual Biogenic CO2 Emissions: (metric tons)

Tier 4 Details:

Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Tier 4 Quarter Fuel Details

First Quarter	Second Quarter	Third Quarter	Fourth Quarter
77711 (Metric Tons)	70376 (Metric Tons)	63567 (Metric Tons)	78935 (Metric Tons)

Total Source Operating Hours: 8610

Operating Hours Details:
Operating hours in which a substitute data value was used in the emissions calculations for CO2 concentration : 147
Operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate : 4
Operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content : 0

Non-Biogenic CO2 emission : 290589 (Metric Tons)
Biogenic CO2 emission : 0 (Metric Tons)
Annual CO2 emission measured by CEMS : 290589 (Metric Tons)
Emissions reported for the CEMS include emissions calculated according to 98.33(a)(4)(viii) for a slipstream that bypassed the CEMS. :

Tier Fuel Details:

Fuel : Bituminous

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
5.32 (Metric Tons)	0.773 (Metric Tons)	132.9 (Metric Tons)	230.5 (Metric Tons)

Fuel : Natural Gas (Weighted U.S. Average)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
3.43 (Metric Tons)	0.343 (Metric Tons)	85.9 (Metric Tons)	102.3 (Metric Tons)

Fuel : Distillate Fuel Oil No. 2

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
0.01 (Metric Tons)	0.002 (Metric Tons)	0.2 (Metric Tons)	0.5 (Metric Tons)

Fuel : Residual Fuel Oil No. 6

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
0.00 (Metric Tons)	0.000 (Metric Tons)	0 (Metric Tons)	0.1 (Metric Tons)

Unit Name : PB10
Unit Type : S (Stoker Boiler)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 659 (mmBtu/hr)

Plant Code : 10017 (numeric, maximum of 6 digits)

Emission Details:
Annual Biogenic CO2 Emissions: (metric tons)

Tier 4 Details:

Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Tier 4 Quarter Fuel Details

First Quarter	Second Quarter	Third Quarter	Fourth Quarter
105263 (Metric Tons)	102212 (Metric Tons)	85532 (Metric Tons)	100793 (Metric Tons)

Total Source Operating Hours: 8713

Operating Hours Details:
Operating hours in which a substitute data value was used in the emissions calculations for CO2 concentration : 0
Operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate : 0
Operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content : 0

Non-Biogenic CO2 emission : 71757.6 (Metric Tons)
Biogenic CO2 emission : 322041.8 (Metric Tons)
Annual CO2 emission measured by CEMS : 393799 (Metric Tons)
Emissions reported for the CEMS include emissions calculated according to 98.33(a)(4)(viii) for a slipstream that bypassed the CEMS. :

Tier Fuel Details:

Fuel : Natural Gas (Weighted U.S. Average)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
1.47 (Metric Tons)	0.147 (Metric Tons)	36.6 (Metric Tons)	43.7 (Metric Tons)

Fuel : Distillate Fuel Oil No. 2

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
0 (Metric Tons)	0 (Metric Tons)	0 (Metric Tons)	0 (Metric Tons)

Fuel : Residual Fuel Oil No. 6

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
0 (Metric Tons)	0 (Metric Tons)	0 (Metric Tons)	0 (Metric Tons)

Fuel : Wood and Wood Residuals (dry basis)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
23.59 (Metric Tons)	11.795 (Metric Tons)	589.8 (Metric Tons)	3514.9 (Metric Tons)

Unit Name : PB-11
Unit Type : OB (Boiler, other)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 170 (mmBtu/hr)

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)

Tier Fuel Details:

Fuel : Natural Gas (Weighted U.S. Average)
Tier Name : Tier 2 (Equation C-2a)
Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31
Frequency of HHV determinations : Monthly

Tier 2 Monthly HHV Details :

January	February	March	April	May	June	July	August	September	October	November	December
N	N	N	N	N	N	N	N	N	N	N	N

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
3563.8 (Metric Tons)	0.07 (Metric Tons)	0.007 (Metric Tons)	1.7 (Metric Tons)	2 (Metric Tons)

Subpart AA: Pulp and Paper Manufacturing

CEMS Monitoring Location (CML) Details for Subpart AA

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	113,976.6 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	702,742 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	17.99 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	3.258 (Metric Tons)
Own Result?

Summary Information for the facility:

Annual Steam Purchase Quantity	()
Annual Production of Unbleached Virgin Chemical Pulp	()

Unit Details:

Unit Name : LK2
Unit Type : Pulp Mill Lime Kiln
Unit Description :

Inputs:

Quantity of Calcium Oxide Produced

Tier Fuel Details:

Fuel type : Natural Gas (Weighted U.S. Average)
Percent of Annual Heat Input Combusted : 1
Tier Name : Tier 1 (Equation C-1b, natural gas billing in mmBtu)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
24412.3 (Metric Tons)	1.24 (Metric Tons)	0 (Metric Tons)	31.1 (Metric Tons)	0 (Metric Tons)

Unit Name : RF4
Unit Type : Chemical Recovery Furnace
Unit Description :

Inputs:

Mass Spent Liquor Solids :	N
Basis for Determination of Mass Spent Liquor Solids	on-line metering/measuring system
Liquor Type for CO2	North American Softwood
Default Emission Factor for CO2	94.4
Default Emission Factor for CH4	0.0019
Default Emission Factor for N2O	0.00042

Outputs:

CO2 Mass Total	341404.2(Metric Tons)
CH4 Mass Total	6.87(Metric Tons)
N2O Mass Total	1.519(Metric Tons)

Tier Fuel Details:

Fuel type : Natural Gas (Weighted U.S. Average)
Tier Name : Tier 1 (Equation C-1b, natural gas billing in mmBtu)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
40076.6 (Metric Tons)	0.76 (Metric Tons)	0.076 (Metric Tons)	18.9 (Metric Tons)	22.5 (Metric Tons)

Unit Name : RF5
Unit Type : Chemical Recovery Furnace
Unit Description :

Inputs:

Mass Spent Liquor Solids :	N
Basis for Determination of Mass Spent Liquor Solids	on-line metering/measuring system
Liquor Type for CO2	North American Hardwood
Default Emission Factor for CO2	93.7
Default Emission Factor for CH4	0.0019
Default Emission Factor for N2O	0.00042

Outputs:

CO2 Mass Total	361337.8(Metric Tons)
CH4 Mass Total	7.33(Metric Tons)
N2O Mass Total	1.620(Metric Tons)

Tier Fuel Details:

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
22825.2 (Metric Tons)	0.43 (Metric Tons)	0.043 (Metric Tons)	10.8 (Metric Tons)	12.8 (Metric Tons)

Unit Name : LK1
Unit Type : Pulp Mill Lime Kiln
Unit Description :

Inputs:

Quantity of Calcium Oxide Produced

Tier Fuel Details:

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
26662.5 (Metric Tons)	1.36 (Metric Tons)	0 (Metric Tons)	33.9 (Metric Tons)	0 (Metric Tons)

Make-up Unit details

Calcium Carbonate Make Up Quantity	N
Sodium Carbonate Make Up Quantity	N
CO2 Mass Total	0.0(Metric Tons)

CEMS Unit Details:

Subpart TT: Industrial Waste Landfills

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	4,049.24 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	0 (Metric Tons)
Own Result?

Landfill Details:

Was the landfill open or closed

Open

First year the landfill accepted waste

1973

If the landfill is open, the estimated year of landfill closure

2040

Landfill Capacity

2240299 (Metric Tons)

Does the landfill have a landfill gas collection system

Passive vents and/or flares are present (vents or flares that are not considered part of the gas collection system)

An indication of whether leachate recirculation was used during the reporting year

The typical frequency of use of leachate recirculation over the past ten (10) years

Not used for the past ten (10) years

Each type of cover material used and Landfill surface area containing waste

Clay cover	724395 (Square Meters)
Other soil mixture	724395 (Square Meters)

Number of waste streams

Annual modeled methane generation TT1

4499.16 (Metric Tons)

Annual modeled methane generation TT1 user overrided value

Equation TT-1 Details:

The fraction of CH4 in landfill gas (F), is it based on a measured value or default value	Default
Fraction by volume of CH4 in landfill gas	()
An MCF value other than the default of 1 was used	N

Waste Stream For Method3 Details:

Capacity of the landfill used (or the total quantity of waste-in-place) at the end of the "YrData" from design drawings or engineering estimates	2564197 (Metric Tons)
Are waste quantity data available?	Waste quantity data are available for some years
The year prior to the year when waste disposal data are first available(YrData)	1998
Do you know the year when the landfill opened?	Yes
The year the landfill first received waste from company records, or 1960 (whichever is more recent)	1973

Methane Generation and Emissions for Landfills without LFG Collection Systems

Methane Oxidation Fraction

Methane Oxidation Fraction TT-6

0.10

Gas Collection Systems details

Methane Generation Equation TT6

4049.24 (Metric Tons)

Waste Stream Summary:

Stream Identification and Method(s) used to determine historical waste stream quantity for Bulk Waste 1973-1998

Stream Name

Bulk Waste 1973-1998

Stream Description

Lime kiln waste, secondary fiber waste, sawdust, bark, concrete, brick, mortar, boiler ash, biomass and coal boiler ash, recycled secondary rejects, dregs&grits, general trash, wwtp sludge and lime & lime mud, unusable wood chips

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes not segregated into separate streams

pulp and paper manufacturing wastes, general

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1973

Last year this waste stream was placed in the landfill

1998

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1973	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1974	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1975	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1976	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1977	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1978	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1979	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1980	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1981	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1982	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1983	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1984	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1985	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1986	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1987	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1988	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1989	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1990	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1991	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1992	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1993	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1994	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1995	N	N	Y	N	0.04	97404.30435 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1996	N	N	Y	N	0.04	107966 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1997	N	N	Y	N	0.04	107966 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
1998	N	N	Y	N	0.04	107966 (Metric Tons)	0.15 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Pulp and Paper WWTP Residuals

Stream Name

Pulp and Paper WWTP Residuals

Stream Description

WWTP Residuals

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

wastewater sludge

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

2017

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
2017	Y	N	N	N	0.06	3550 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.06	4389.8 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.06	4874 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.06	4518.4 (Metric Tons)	0.12 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Pulp and Paper (Through 2016)

Stream Name

Pulp and Paper (Through 2016)

Stream Description

Biomass boiler ash, recycled secondary rejects, dregs & grits, general trash, wwtp sludge and lime & lime mud

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes not segregated into separate streams

pulp and paper manufacturing wastes, general

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1999

Last year this waste stream was placed in the landfill

2016

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1999	Y	N	N	N	0.04	105238.22 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2000	Y	N	N	N	0.04	96656.26 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2001	Y	N	N	N	0.04	110934.41 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2002	Y	N	N	N	0.04	98184.47 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2003	Y	N	N	N	0.04	94688.34 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2004	Y	N	N	N	0.04	78320.06 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2005	Y	N	N	N	0.04	75519.92 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2006	Y	N	N	N	0.04	125607.55 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2007	Y	N	N	N	0.04	85172.02 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2008	Y	N	N	N	0.04	83790.92 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2009	Y	N	N	N	0.04	96729.54 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2010	Y	N	N	N	0.04	133444.75 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2011	Y	N	N	N	0.04	86363.48 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2012	Y	N	N	N	0.04	122231.52 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2013	Y	N	N	N	0.04	88048.00 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2014	Y	N	N	N	0.04	76939 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2015	Y	N	N	N	0.04	120784 (Metric Tons)	0.15 (Metric Tons)	Y	N	N
2016	Y	N	N	N	0.04	178670 (Metric Tons)	0.15 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Wood and Wood Product

Stream Name

Wood and Wood Product

Stream Description

Unusable wood chips and bark

Type(s) Of Waste Present In The Waste Stream

wood and wood product

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1999

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1999	Y	N	N	N	0.04	876.89 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2000	Y	N	N	N	0.04	4356.87 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2001	Y	N	N	N	0.04	1398.61 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2002	Y	N	N	N	0.04	154.31 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2003	Y	N	N	N	0.04	361.29 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2004	Y	N	N	N	0.04	233.92 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2005	Y	N	N	N	0.04	1156.12 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2006	Y	N	N	N	0.04	151.86 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2007	Y	N	N	N	0.04	93.08 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2008	Y	N	N	N	0.04	143.9 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2009	Y	N	N	N	0.04	504.58 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2010	Y	N	N	N	0.04	20.82 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2011	Y	N	N	N	0.04	936.9 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2012	Y	N	N	N	0.04	2138.9 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2013	Y	N	N	N	0.04	1400.0 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2014	Y	N	N	N	0.04	3283 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2015	Y	N	N	N	0.04	3746 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2016	Y	N	N	N	0.04	8685 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2017	Y	N	N	N	0.04	7184.5 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	3519.12 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	7123 (Metric Tons)	0.43 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	7492 (Metric Tons)	0.43 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Construction and Demolition

Stream Name

Construction and Demolition

Stream Description

Mixture of sawdust and concrete wastes

Type(s) Of Waste Present In The Waste Stream

construction and demolition

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1999

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1999	Y	N	N	N	0.04	9143.75 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2000	Y	N	N	N	0.04	8147.17 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2001	Y	N	N	N	0.04	3990.92 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2002	Y	N	N	N	0.04	923.1 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2003	Y	N	N	N	0.04	3117.76 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2004	Y	N	N	N	0.04	2851.97 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2005	Y	N	N	N	0.04	4385.88 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2006	Y	N	N	N	0.04	13547.99 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2007	Y	N	N	N	0.04	6590.3 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2008	Y	N	N	N	0.04	4996.68 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2009	Y	N	N	N	0.04	1047.1 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2010	Y	N	N	N	0.04	2085.01 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2011	Y	N	N	N	0.04	1102.21 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2012	Y	N	N	N	0.04	1336.43 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2013	Y	N	N	N	0.04	2094.0 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2014	Y	N	N	N	0.04	1832 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2015	Y	N	N	N	0.04	3444 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2016	Y	N	N	N	0.04	6606 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2017	Y	N	N	N	0.04	3859 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	2336.3 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	2029 (Metric Tons)	0.08 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	1111 (Metric Tons)	0.08 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Boiler Ash

Stream Name

Boiler Ash

Stream Description

Boiler Ash (coal and wood ash)

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

boiler ash

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

2017

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
2017	Y	N	N	N	0.04	16256 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	12205 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	14656 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	16440 (Metric Tons)	0.06 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Kraft Recovery Residuals

Stream Name

Kraft Recovery Residuals

Stream Description

Lime Mud, Dregs, Grits

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

kraft recovery wastes

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

2017

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
2017	Y	N	N	N	0.04	13109 (Metric Tons)	0.025 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	8567 (Metric Tons)	0.025 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	8639 (Metric Tons)	0.025 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	11666 (Metric Tons)	0.025 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for Other Pulp and Paper Wastes

Stream Name

Other Pulp and Paper Wastes

Stream Description

Mixed materials (non wtp residuals, kraft recovery residuals, boiler ash)

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

other pulp and paper wastes

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

2017

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
2017	Y	N	N	N	0.04	47169 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	53042 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	49013 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	51122 (Metric Tons)	0.2 (Metric Tons)	Y	N	N

Method #1: Used one of the waste quantity measurement methods specified in 98.463(a)(2)(i): direct mass measurements, direct volume measurements multiplied by waste stream density, mass balance procedures (difference between the mass of process inputs and the mass of process outputs), or the number of loads multiplied by the mass of waste per load based on the working capacity of the vehicle or container.
Method #2: Calculated the average waste disposal rate per Equation TT-2 and calculated the waste disposal quantities for historic years in which direct waste disposal measurements are not available using historical production data per Equation TT-3.
Method #3: Calculated an average annual bulk waste disposal quantity for historic years when waste quantity data as determined by other methods are available consecutively for the most recent disposal years (Equation TT-4a).
Method #4: Calculated an average annual bulk waste disposal quantity for historic years when waste quantity data as determined by other methods are available for sporadic (non-consecutive) years (Equation TT-4b).