Address: 2596 Battle Run Road
City: Triadelphia
State: WV
Postal Code: 26059

CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):766,712
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):0
Cogeneration Unit Emissions Indicator:N
GHG Report Start Date:2020-01-01
GHG Report End Date:2020-12-31
Description of Changes to Calculation Methodology:
Plant Code Indicator:N
Primary NAICS Code:212112
Second Primary NAICS Code:

Parent Company Details:

Subpart FF: Underground Coal Mines

SubpartFFSummaryDetails:

MSHA Individual Identification Number:	4608864
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]	6724.51
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]	0
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]	8010.71
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]	0
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]	7291.36
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]	0
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]	8641.9
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]	0

WellAndShaftDetails:


WellAndShaftCollectionRowDetails:

Well and Shaft ID or Name [§98.326(r)]	Battle Run
Identify if this is a well or a shaft [§98.326(r)]	Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]	exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]	2011-08-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]	2019-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]	365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]	monitored as part of a centralized monitoring point
Identify the Centralized Monitoring Point [§98.326(s)]	Battle Run
Well and Shaft ID or Name [§98.326(r)]	Winters Shaft
Identify if this is a well or a shaft [§98.326(r)]	Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]	exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]	2017-07-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]	2019-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]	365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]	monitored as part of a centralized monitoring point
Identify the Centralized Monitoring Point [§98.326(s)]	Winters Shaft
Well and Shaft ID or Name [§98.326(r)]	Wagner Shaft
Identify if this is a well or a shaft [§98.326(r)]	Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]
Description [§98.326(r)]	Bleeder shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]	2018-10-06
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]	2019-12-31
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]	365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]	monitored as part of a centralized monitoring point
Identify the Centralized Monitoring Point [§98.326(s)]	Wagner Shaft

VentilationQuarterlyDetails:


VentilationMonitoringQuarterlyRowDetails:

Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Battle Run
Quarter	1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-01-01
Stop date	2020-03-31
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	404264
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Battle Run
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-01-14
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.103
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Battle Run
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-01-14
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	511.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.96
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	581.35
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Wagner Shaft
Quarter	1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-01-01
Stop date	2020-03-31
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	219259
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Wagner Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-01-22
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.914
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Wagner Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-01-22
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	494.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.97
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	5066.9
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Winters Shaft
Quarter	1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-01-01
Stop date	2020-03-31
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	740070
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Winters Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-01-14
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.052
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Winters Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-01-14
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	511.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.96
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	1076.26
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Battle Run
Quarter	2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-04-01
Stop date	2020-06-30
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	482370
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Battle Run
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-04-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.106
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Battle Run
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-04-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	520.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.958
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	789.77
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Wagner Shaft
Quarter	2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-04-01
Stop date	2020-06-30
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	225035
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Wagner Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-04-15
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.976
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Wagner Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-04-15
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	520.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.95651
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	5411.75
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Winters Shaft
Quarter	2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-04-01
Stop date	2020-06-30
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	944597
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Winters Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-04-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.076
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Winters Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-04-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	511.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.959
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	1809.19
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Battle Run
Quarter	3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-07-01
Stop date	2020-09-30
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	466153
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Battle Run
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-07-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.093
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Battle Run
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-07-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	549.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.959
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	712.75
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Wagner Shaft
Quarter	3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-07-01
Stop date	2020-09-30
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	252595
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Wagner Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-07-23
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.927
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Wagner Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-07-23
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	537.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.962
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	5441.26
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Winters Shaft
Quarter	3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-07-01
Stop date	2020-09-30
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	703552
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Winters Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-07-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.069
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Winters Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-07-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	549.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.959
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	1137.35
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Battle Run
Quarter	4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-10-01
Stop date	2020-12-31
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	429858
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Battle Run
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-10-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.226
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Battle Run
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-10-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	531.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.961
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	2022.09
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Wagner Shaft
Quarter	4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-10-01
Stop date	2020-12-31
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	296643
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Wagner Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-10-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.722
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Wagner Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-10-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	531.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.961
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	5182.41
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]	Winters Shaft
Quarter	4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date	2020-10-01
Stop date	2020-12-31
Method used for flow rate [§98.326(f), (r), (s)]	Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]	704480
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]	acfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]	Winters Shaft
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]	2020-10-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]	Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]	0.083
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]	No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]
Location of each measurement of concentration [§98.326(g)]	Winters Shaft
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]	2020-10-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]	522.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]	0.964
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]	Flow rate and CH4 concentration were measured on a dry basis
Was a flow meter used? [§98.326(f)-(g)]	A flow meter was used and the flow meter automatically corrected for moisture content
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
Moisture correction factor used in Eq. FF-1 [§98.326(o)]	1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1	1437.4
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]

EmissionsSummaryFFDetails:


TotalResultForMethaneLiberatedFromVentilationSystemsRowDetails:

Quarter	Quarter 1 (Jan-Mar)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	6724.51 N
Quarter	Quarter 2 (Apr-Jun)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	8010.71 N
Quarter	Quarter 3 (Jul-Sep)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	7291.36 N
Quarter	Quarter 4 (Oct-Dec)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	8641.9 N

TotalResultForMethaneLiberatedFromMonitoringPointsRowDetails:

Quarter	Quarter 1 (Jan-Mar)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N
Quarter	Quarter 2 (Apr-Jun)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N
Quarter	Quarter 3 (Jul-Sep)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N
Quarter	Quarter 4 (Oct-Dec)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N

TotalQuarterlyMethaneDestroyedAtMineTransportedOffsiteRowDetails:

Quarter	Quarter 1 (Jan-Mar)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N
Quarter	Quarter 2 (Apr-Jun)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N
Quarter	Quarter 3 (Jul-Sep)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N
Quarter	Quarter 4 (Oct-Dec)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result	0 N

TotalQuarterlyNetMethaneEmissionsRowDetails:

Quarter	Quarter 1 (Jan-Mar)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]	6724.51
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]	0
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]	0
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]	6724.51
Quarter	Quarter 2 (Apr-Jun)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]	8010.71
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]	0
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]	0
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]	8010.71
Quarter	Quarter 3 (Jul-Sep)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]	7291.36
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]	0
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]	0
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]	7291.36
Quarter	Quarter 4 (Oct-Dec)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]	8641.9
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]	0
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]	0
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]	8641.9