Address: 22614 ROUTE 84 NORTH
City: CORDOVA
State: IL
Postal Code: 61242

CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):657,046.3
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):0
Cogeneration Unit Emissions Indicator:N
GHG Report Start Date:2020-01-01
GHG Report End Date:2020-12-31
Description of Changes to Calculation Methodology:
Plant Code Indicator:N
Primary NAICS Code:325998
Second Primary NAICS Code:325211

Parent Company Details:

Subpart C: General Stationary Fuel Combustion

Subpart L: Fluorinated Gas Production

Summary Information

Did the facility produce only one fluorinated gas product, including fluorinated gas products that are intermediates?	No
Did the facility emit 1,000 or more metric tons of CO2e of any one fluorinated GHG from production and transformation processes, summed across the facility as a whole?	Yes
Did the facility destroy previously produced fluorinated GHGs in destruction processes that are not part of a fluorinated gas production process or fluorinated gas transformation process?	No
Did the facility vent residual fluorinated GHGs from containers?	No

Production and Transformation Process F-GHG Emissions

Gas Name	Gas Description	CAS No.	GWP Group	Production and transformation process F-GHG emissions (metric tons)	Optional Comments
PFC-3-1-10 (Perfluorobutane)	C4F10	355-25-9		0.4338
Trifluoromethyl sulphur pentafluoride	SF5CF3	373-80-8		0.8149
Octafluorotetrahydrofuran	C4F8O	773-14-8		0.8103
HFC-236fa	C3H2F6	690-39-1		0.1658
PFC-116 (Perfluoroethane)	C2F6	76-16-4		0.3791
HFC-227ea	C3HF7	431-89-0		1.8585
PFC-5-1-14 (Perfluorohexane, FC 72)	C6F14	355-42-0		4.1552
HFE-449sl, (HFE-7100) Isomer blend	C4F9OCH3, (CF3)2CFCF2OCH3	163702-07-6, 163702-08-7		10.1822
HFC-23	CHF3	75-46-7		0.2564
Trifluoromethanesulfonyl fluoride	CF3SO2F	335-05-7		2.5912
Perfluorobutanesulfonyl fluoride	CF3(CF2)3SO2F	375-72-4		1.9417
PFC-4-1-12 (Perfluoropentane)	C5F12	678-26-2		0.5552
PFC-14 (Perfluoromethane)	CF4	75-73-0		66.4039
PFC-218 (Perfluoropropane)	C3F8	76-19-7		0.6677
Pentafluoro(trifluoromethoxy)-ethane	C3F8O	665-16-7		0.3187
Hexafluorooxetane	C3F6O	425-82-1		0.4512
Sulfur hexafluoride	SF6	2551-62-4		0.0580
FC-3283/FC-8270 (Perfluorotripropylamine)	(C3F7)3N	338-83-0		0.7976
FC-40/FC-43 (Perfluorotributylamine (PTBA))	(C4F9)3N	1064698-37-8		0.3755

Production and Transformation Process GHG Group Emissions

Fluorinated GHG Group	Production and transformation process GHG group emissions (metric tons CO2e)	Optional Comments
Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds	493.0736
Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols	0.1625
Saturated HFCs with 3 or more carbon-hydrogen bonds	108.7046
Fully fluorinated GHGs	8236.3625
Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones	8.3346
Other fluorinated GHGs	2905.5758
Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond	2.7318
Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds	1119.5995
Saturated HFEs and HCFEs with 2 carbon-hydrogen bonds	0.3391
Fluorinated formates	0.3196

Production and Transformation Processes

Unique Name/Identifier	Process #1
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	20.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	97.9
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	35646.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	442.1

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	6.6

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	21.3

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #100
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4662.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	10.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1259.9

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	52.6

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #151
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	13.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3675.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.6

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	89.6

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #101
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	6.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	370.3

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.3

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #83
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	68.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	33.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1078.6

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	137.1

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #501
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	621.4
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #601
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	295.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #503
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	58.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	347.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	10.5

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	64.9

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	273.9

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	9.2

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #5
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	263.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1442.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	129.9

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	32.1

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.2

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	177.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #104
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	40.4
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #504
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	8.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	103.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.9

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	47.4

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	12.6

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1319.9

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #121
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	79.5
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.5

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #505
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	683.9
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #7
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	59.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.2

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #107
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	12.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #507
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1151.4
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	16.9

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #147
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3950.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	63.5

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #108
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.9
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #508
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #10
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	74.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #509
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	15.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #11
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	66.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	7.1

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #76
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	6682.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	63.4

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #98
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.3

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #520
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #13
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	8.5
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.2

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #112
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	27.7
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #512
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	24.7
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #113
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	5.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1576.9
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.1

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.2

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.7

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #513
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	780.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	630.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	265736.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	142.1

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	8.6

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	488.5

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #15
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	296.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #114
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	248.7
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	5.4

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #16
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	44.7
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #115
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.4

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #515
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #17
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	8.3

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #116
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	374.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	28.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	6370.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.3

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #19
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	581.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	513.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	49.9
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	119040.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	97.2

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	3.2

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.3

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	38.0

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #118
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	80.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #518
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.5
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #514
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #519
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	14163.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1178.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	5.7
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	9.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	223.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	62.3

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.8

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	10.5

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #120
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #22
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #546
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	41009.7
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	127.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	400.6

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	104.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.2

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #521
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1662.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #23
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=75% to <95%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	750.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	26.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	51.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	5.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.9

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #122
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	6.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.9

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	19.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	3.3

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #123
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	253.5
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	24.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #523
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	21.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.2

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #124
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	8280.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	4.1

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #99
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	214.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	144.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	21553.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	32.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	5.3

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #526
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	26.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 2 carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	11.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	6.1

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	54.9

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.9

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 2 carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #127
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	178.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	170.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	333.9
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	50.7
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 2 carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	26.7

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	18.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	39.2

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 2 carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.2

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #300
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #29
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	46.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.8

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #30
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.3

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.9

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #529
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #530
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #531
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	7.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #33
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	8.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #132
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #532
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #34
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	156.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	592.5
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	4.0

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	58.7

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #9
Process Type	Transformation Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	17.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	14.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	114.6

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	4448.7

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #133
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #533
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #35
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2820.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	6.9

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #534
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.3

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	38.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #135
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	37.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #420
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	28.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #37
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4867.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.6

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	115.6

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2298.2

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #537
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #59
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #538
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1161.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #31
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	11.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #80
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated formates
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	9.6

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	363.0

Fluorinated GHG Group	Fluorinated formates
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #421
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1851.4
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #70
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	228.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	197.9

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.4

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	11.9

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	5.7

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #42
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	17235.4
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	154.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	701.6

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.6

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #40
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3.7
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3028.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.6

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	682.7

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #139
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2408.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #41
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	5.9
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #140
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2890.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	29.8

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #540
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3908.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	270.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #541
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3.7
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1127.5
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #43
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.4
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	250.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.9

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	3.5

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	60.8

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #142
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2743.9
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	64.6

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #542
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2213.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	11.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	8.7

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #550
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	12.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	3.3

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #143
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	171.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.6
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	815.0

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.6

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #543
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	57.8
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	23.6

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #144
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	59.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #623
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	8.1
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #6
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	65.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	3101.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	258.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor
Process Vent Specific Emission Factor	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	62.2

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	757.5

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	59.7

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.7

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #61
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.6
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.7

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.5

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #141
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	167.7
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #539
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	59.7
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	142.1

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #77
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #91
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.8

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	3.4

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #800
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=95% to <99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	5914.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	492.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	2.4
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	93.3
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	6.7

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.8

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #801
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #602
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=99%

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	538.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.4
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	8.5
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	54.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	88.5

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.4

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	9.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #600
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	4.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #430
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	5.8
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #701
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.2
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #81
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation
Packaging	Yes
Optional Comments
The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35.	>=0% to <75%

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	1051.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated formates
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.3
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	10.4
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	846.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.1
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fluorinated formates
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Saturated HFCs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Unsaturated perfluorocarbons (PFCs), unsaturated HFCs, unsaturated hydrochlorofluorocarbons (HCFCs), unsaturated halogenated ethers, unsaturated halogenated esters, fluorinated aldehydes, and fluorinated ketones
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.1

Fluorinated GHG Group	Fluorinated acetates, carbonofluoridates, and fluorinated alcohols other than fluorotelomer alcohols
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #18
Process Type	Production Process
Characterize the process:
Reaction
Distillation	Yes
Packaging
Optional Comments

Process Vent Emissions

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated hydrofluoroethers (HFEs) and hydrochlorofluoroethers (HCFEs) with 1 carbon-hydrogen bond
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	2.7

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	32.0

Fluorinated GHG Group	Other fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	26.9

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1.6

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #4
Process Type	Production Process
Characterize the process:
Reaction	Yes
Distillation	Yes
Packaging
Optional Comments

Process Vent Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Fully fluorinated GHGs
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	1623.5

Fluorinated GHG Group	Saturated hydrofluorocarbons (HFCs) with 2 or fewer carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method
EPA Correlation Approach w/ Site Specific Leak Monitoring Method	Yes
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring	Yes
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	17.1

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data

Unique Name/Identifier	Process #535
Process Type	Production Process
Characterize the process:
Reaction
Distillation
Packaging	Yes
Optional Comments

Process Vent Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents
Process Vent Emission Calculation Factor	Yes
Process Vent Specific Emission Factor
GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e)	0.0
Effective destruction efficiency range (CO2e basis)

Were the annual emissions of one or more F-GHG groups based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from process vents
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of missing data

Equipment Leak Emissions

Fluorinated GHG Group	Saturated HFEs and HCFEs with 3 or more carbon-hydrogen bonds
Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks
Average EF Approach
Screening Ranges Approach w/ M21
EPA Correlation Approach w/ M21
Unit Specific Correlation Approach w/ M21
Screening Ranges Approach w/ Site Specific Leak Monitoring Method	Yes
EPA Correlation Approach w/ Site Specific Leak Monitoring Method
Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method
Other Site Specific Leak Monitoring
GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e)	0.0

Were the annual emissions from equipment leaks based on a missing data procedure?	No
Data element for which missing data procedures were used, and the reason for the missing data
Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks
Provide the method used to estimate the missing data
If the data element is reportable under subpart L, provide estimates of the missing data