Subpart QQ: Importers and Exporters of Fluorinated Greenhouse Gases Contained in Pre-Charged Equipment or Closed-Cell Foams
SF6 or PFC | Sulfur hexafluoride |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | No |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | No |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | No |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | No |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | No |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | No |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | No |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | No |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | No |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | No |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | No |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-14 (Perfluoromethane) |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-116 (Perfluoroethane) |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-218 (Perfluoropropane) |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | Perfluorocyclopropane |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-3-1-10 (Perfluorobutane) |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | Perfluorocyclobutane |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-4-1-12 (Perfluoropentane) |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-5-1-14 (Perfluorohexane) |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
SF6 or PFC | PFC-9-1-18 |
Were missing data used for the pounds of GHG stored in containers at the beginning of the year? [§98.456(a)/(t)] | |
If yes, report the reason the data were missing [§98.456(a)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(a)/(t)] | |
Were missing data used for the pounds of GHG stored in containers at the end of the year? [§98.456(b)/(t)] | |
If yes, report the reason the data were missing [§98.456(b)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(b)/(t)] | |
Were missing data used for the pounds of GHG purchased in bulk during the year? [§98.456(c)/(t)] | |
If yes, report the reason the data were missing [§98.456(c)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(c)/(t)] | |
Were missing data used for the pounds of GHG returned by equipment users with or inside equipment during the year? [§98.456(d)/(t)] | |
If yes, report the reason the data were missing [§98.456(d)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(d)/(t)] | |
Were missing data used for the pounds of GHG returned to the site from offsite after recycling during the year? [§98.456(e)/(t)] | |
If yes, report the reason the data were missing [§98.456(e)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(e)/(t)] | |
Were missing data used for the pounds of GHG inside new equipment delivered during the year? [§98.456(f)/(t)] | |
If yes, report the reason the data were missing [§98.456(f)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(f)/(t)] | |
Were missing data used for the pounds of GHG delivered to equipment users during the year? [§98.456(g)/(t)] | |
If yes, report the reason the data were missing [§98.456(g)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(g)/(t)] | |
Were missing data used for the pounds of GHG returned to suppliers during the year? [§98.456(h)/(t)] | |
If yes, report the reason the data were missing [§98.456(h)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(h)/(t)] | |
Were missing data used for the pounds of GHG sent offsite for destruction during the year? [§98.456(i)/(t)] | |
If yes, report the reason the data were missing [§98.456(i)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(i)/(t)] | |
Were missing data used for the pounds of GHG sent offsite to be recycled during the year? [§98.456(j)/(t)] | |
If yes, report the reason the data were missing [§98.456(j)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(j)/(t)] | |
Were missing data used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? [§98.456(k)/(t)] | |
If yes, report the reason the data were missing [§98.456(k)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(k)/(t)] | |
Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? [§98.456(k)] | |
If no, report the nameplate capacity of the equipment delivered with GHG inside. (pounds) [§98.456(k)] | |
| Hose 1 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1/2" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 58.9 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 964 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 56779.6 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose 2 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1/2" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 58.9 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 963 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 56720.7 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose 3 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 294 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 522 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 153468 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose 4 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 294 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 522 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 153468 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose 5 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 294 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 522 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 153468 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose 6 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 294 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 522 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 153468 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose A |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | Calculation |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | 1" |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | mg per fill operation |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per A3 or A4) [§98.456(m)] | 265 |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | 323 |
ECi = The mass of SF6 emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 85595 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled [§98.456(l)] | |
Valve fitting sizes and hose diameters for each hose and valve combination [§98.456(m)] | |
Units of measure for EFC for each hose and valve combination [§98.456(m)] | |
Specify other unit of measure in the form: "mass per fill operation" [§98.456(m)] | |
EFCi = The emission factor for the valve-hose combination Ci (units per B3 or B4) [§98.456(m)] | |
FCi = The total number of fill operations during the reporting year for the valve-hose combination Ci [§98.456(n)] | |
ECi = The mass of PFC emitted during the reporting year downstream of the containers used to fill equipment or cylinders and in cases where a flowmeter is used, downstream of the flowmeter during the reporting year for the valve-hose combination Ci | 0 |
| Hose 1 |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
| Hose 2 |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
| Hose 3 |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
| Hose 4 |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
| Hose 5 |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
| Hose 6 |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
| Hose A |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | No |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | No |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
Were missing data used for determining the value for EFC for the hose and valve combination? [§98.456(m)/(t)] | |
If yes, report the reason the data were missing [§98.456(m)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(m)/(t)] | |
Were missing data used for total number of filling operations for each valve combination, or, FCiv of Equation SS-5, during the year? [§98.456(n)/(t)] | |
If yes, report the reason the data were missing [§98.456(n)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(n)/(t)] | |
SF6 or PFC | Sulfur hexafluoride |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | No |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | No |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | No |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-14 (Perfluoromethane) |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-116 (Perfluoroethane) |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-218 (Perfluoropropane) |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | Perfluorocyclopropane |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-3-1-10 (Perfluorobutane) |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | Perfluorocyclobutane |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-4-1-12 (Perfluoropentane) |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-5-1-14 (Perfluorohexane) |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |
SF6 or PFC | PFC-9-1-18 |
Were missing data used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations? (MF in Equation SS-6) [§98.456(q)/(t)] | |
If yes, report the reason the data were missing [§98.456(q)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(q)/(t)] | |
Were missing data used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility? (MC in Equation SS-6) [§98.456(r)/(t)] | |
If yes, report the reason the data were missing [§98.456(r)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(r)/(t)] | |
Were missing data used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation? (NI in Equation SS-6) [§98.456(s)/(t)] | |
If yes, report the reason the data were missing [§98.456(s)/(t)] | |
If Yes, report the method used to estimate the substitute data [§98.456(s)/(t)] | |