CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):851,481.9
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):0
Cogeneration Unit Emissions Indicator:N
GHG Report Start Date:2020-01-01
GHG Report End Date:2020-12-31
Description of Changes to Calculation Methodology:
Plant Code Indicator:N
Primary NAICS Code:325120
Second Primary NAICS Code:
Parent Company Details:
Parent Company Name:VERSUM MATERIALS INC
Address:8555 S. River Parkway,
Tempe,
AZ 85282
Percent Ownership Interest:100
Subpart C: General Stationary Fuel Combustion
Gas Information Details
| Gas Name | Carbon Dioxide |
| Gas Quantity | 3,460.7 (Metric Tons) |
| Own Result? | |
| Gas Name | Biogenic Carbon dioxide |
| Gas Quantity | 0 (Metric Tons) |
| Own Result? | |
| Gas Name | Methane |
| Gas Quantity | 0.14 (Metric Tons) |
| Own Result? | |
| Gas Name | Nitrous Oxide |
| Gas Quantity | 0.028 (Metric Tons) |
| Own Result? | |
Unit Details:
Unit Name : GP-Facility
Unit Type : OCS (Other combustion source)
Unit Description :
Other Unit Name :
Small Unit Aggregation Details:
Use Ivt Indicator: N
Highest Maximum Rated Heat Input Capacity:
14.7
Cumulative Maximum Rated Heat Input Capacity:
29.4
Emission Details:
Annual CO2 mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions:
0
(metric tons)
Annual Fossil fuel based CO2 Emissions:
3460.7
(metric tons)
Tier Fuel Details:
Fuel :
Distillate Fuel Oil No. 2
Tier Name :
Tier 1 (Equation C-1)
Tier Methodology Start Date :
2020-01-01
Tier Methodology End Date :
2020-12-31
Fuel Emission Details :
| Total CO2 emissions | Total CH4 emissions | Total N2O emissions | Total CH4 emissions CO2e | Total N2O emissions CO2e |
|
3460.7
(Metric Tons)
|
0.14
(Metric Tons)
|
0.028
(Metric Tons)
|
3.5
(Metric Tons)
|
8.4
(Metric Tons)
|
Equation C1/C8 Inputs :
Fuel Quantity :
339068
(gallons/year)
Subpart L: Fluorinated Gas Production
Gas Information Details
| Gas Name | Other |
| Other Gas Name | CO2 equivalent (from unspecified gases) |
| Gas Quantity | 848,009.3 (Metric Tons) |
| Own Result? | |
Summary Information
| Did the facility produce only one fluorinated gas product, including fluorinated gas products that are intermediates? | No |
| Did the facility emit 1,000 or more metric tons of CO2e of any one fluorinated GHG from production and transformation processes, summed across the facility as a whole? | Yes |
| Did the facility destroy previously produced fluorinated GHGs in destruction processes that are not part of a fluorinated gas production process or fluorinated gas transformation process? | No |
| Did the facility vent residual fluorinated GHGs from containers? | No |
Production and Transformation Process F-GHG Emissions
| Gas Name | Gas Description | CAS No. | GWP Group | Production and transformation process F-GHG emissions (metric tons) | Optional Comments |
| PFC-14 (Perfluoromethane) | CF4 | 75-73-0 | | 10.3090 | |
| PFC-116 (Perfluoroethane) | C2F6 | 76-16-4 | | 0.2852 | |
| Nitrogen trifluoride | NF3 | 7783-54-2 | | 44.6713 | |
Production and Transformation Processes
| Unique Name/Identifier | Process 1 |
| Process Type | Production Process |
| Characterize the process: |
| Reaction | Yes |
| Distillation | |
| Packaging | Yes |
| Optional Comments | |
| The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35. | >=0% to <75% |
Process Vent Emissions
| Fluorinated GHG Group | Fully fluorinated GHGs |
| Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents | |
| Process Vent Emission Calculation Factor | Yes |
| Process Vent Specific Emission Factor | Yes |
| GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e) | 710166.2 |
| Effective destruction efficiency range (CO2e basis) | |
| Were the annual emissions of one or more F-GHG groups based on a missing data procedure? | No |
| Data element for which missing data procedures were used, and the reason for the missing data | |
| Number of hours a missing data procedure was used to determine F-GHG emissions from process vents | |
| Provide the method used to estimate the missing data | |
| If the data element is reportable under subpart L, provide estimates of missing data | |
Equipment Leak Emissions
| Fluorinated GHG Group | Fully fluorinated GHGs |
| Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks | |
| Average EF Approach | |
| Screening Ranges Approach w/ M21 | |
| EPA Correlation Approach w/ M21 | |
| Unit Specific Correlation Approach w/ M21 | |
| Screening Ranges Approach w/ Site Specific Leak Monitoring Method | |
| EPA Correlation Approach w/ Site Specific Leak Monitoring Method | |
| Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method | |
| Other Site Specific Leak Monitoring | Yes |
| GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e) | 58180.7 |
| Were the annual emissions from equipment leaks based on a missing data procedure? | No |
| Data element for which missing data procedures were used, and the reason for the missing data | |
| Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks | |
| Provide the method used to estimate the missing data | |
| If the data element is reportable under subpart L, provide estimates of the missing data | |
| Unique Name/Identifier | Process 2 |
| Process Type | Production Process |
| Characterize the process: |
| Reaction | Yes |
| Distillation | |
| Packaging | Yes |
| Optional Comments | |
| The range (Table L-2) that encompasses the effective destruction efficiency, DEeffective, calculated for this process using Equation L-35. | >=0% to <75% |
Process Vent Emissions
| Fluorinated GHG Group | Fully fluorinated GHGs |
| Methods used to determine the mass emissions of each fluorinated GHG group emitted from process vents | |
| Process Vent Emission Calculation Factor | Yes |
| Process Vent Specific Emission Factor | Yes |
| GWP-weighted mass of all fluorinated GHGs in this group emitted from all process vents combined (metric tons CO2e) | 69144.7 |
| Effective destruction efficiency range (CO2e basis) | |
| Were the annual emissions of one or more F-GHG groups based on a missing data procedure? | No |
| Data element for which missing data procedures were used, and the reason for the missing data | |
| Number of hours a missing data procedure was used to determine F-GHG emissions from process vents | |
| Provide the method used to estimate the missing data | |
| If the data element is reportable under subpart L, provide estimates of missing data | |
Equipment Leak Emissions
| Fluorinated GHG Group | Fully fluorinated GHGs |
| Methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks | |
| Average EF Approach | |
| Screening Ranges Approach w/ M21 | |
| EPA Correlation Approach w/ M21 | |
| Unit Specific Correlation Approach w/ M21 | |
| Screening Ranges Approach w/ Site Specific Leak Monitoring Method | |
| EPA Correlation Approach w/ Site Specific Leak Monitoring Method | |
| Unit Specific Correlation Approach w/ Site Specific Leak Monitoring Method | |
| Other Site Specific Leak Monitoring | Yes |
| GWP-weighted mass of all fluorinated GHGs in this group emitted from equipment leaks (metric tons CO2e) | 10518.2 |
| Were the annual emissions from equipment leaks based on a missing data procedure? | No |
| Data element for which missing data procedures were used, and the reason for the missing data | |
| Number of hours a missing data procedure was used to determine F-GHG emissions from equipment leaks | |
| Provide the method used to estimate the missing data | |
| If the data element is reportable under subpart L, provide estimates of the missing data | |