GHG Summary Report

CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):761,416.3
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):1,691,673.4
Cogeneration Unit Emissions Indicator:N
GHG Report Start Date:2020-01-01
GHG Report End Date:2020-12-31
Description of Changes to Calculation Methodology:Update 2/13/2023 - While completing the 2022 GP Cedar Springs, LLC GHG report the facility discovered that the CO2e metric tons from the Tier 1 Fuel Propane Gas had previously been over reported due to a calculation error in a facility spreadsheet that used an incorrect emission factor (62.87 kg/MMBtu). GP has corrected the error and re-submitted reports for the 2018-2021 reporting years utilizing the correct emission factor (61.46 kg/MMBtu).
Plant Code Indicator:Y
Primary NAICS Code:322130
Second Primary NAICS Code:

Parent Company Details:

Parent Company Name:KOCH INDUSTRIES INC
Address:4111 E 37th Street North, Wichita, KS 67220-3203
Percent Ownership Interest:100

Subpart C: General Stationary Fuel Combustion

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	595,714.8 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	486,924.4 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	73.7 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	23.899 (Metric Tons)
Own Result?

Unit Details:

Unit Name : No. 1 Power Boiler U500
Unit Type : S (Stoker Boiler)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 784 (mmBtu/hr)

Plant Code : 54101 (numeric, maximum of 6 digits)

Emission Details:
Annual Biogenic CO2 Emissions: (metric tons)

Tier 4 Details:

Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Tier 4 Quarter Fuel Details

First Quarter	Second Quarter	Third Quarter	Fourth Quarter
148756 (Metric Tons)	127229.1 (Metric Tons)	135427.2 (Metric Tons)	106392.2 (Metric Tons)

Total Source Operating Hours: 8506

Operating Hours Details:
Operating hours in which a substitute data value was used in the emissions calculations for CO2 concentration : 0
Operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate : 31
Operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content : 0

Non-Biogenic CO2 emission : 278801.8 (Metric Tons)
Biogenic CO2 emission : 239003 (Metric Tons)
Annual CO2 emission measured by CEMS : 517804.5 (Metric Tons)
Emissions reported for the CEMS include emissions calculated according to 98.33(a)(4)(viii) for a slipstream that bypassed the CEMS. :

Tier Fuel Details:

Fuel : Bituminous

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
17.17 (Metric Tons)	2.498 (Metric Tons)	429.3 (Metric Tons)	744.3 (Metric Tons)

Fuel : Natural Gas (Weighted U.S. Average)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
0.49 (Metric Tons)	0.049 (Metric Tons)	12.2 (Metric Tons)	14.5 (Metric Tons)

Fuel : Wood and Wood Residuals (dry basis)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
18.35 (Metric Tons)	9.173 (Metric Tons)	458.6 (Metric Tons)	2733.5 (Metric Tons)

Unit Name : Thermal Oxidizer (R425)
Unit Type : OB (Boiler, other)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 30 (mmBtu/hr)

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)

Tier Fuel Details:

Fuel : Natural Gas (Weighted U.S. Average)
Tier Name : Tier 2 (Equation C-2a)
Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31
Frequency of HHV determinations : Monthly

Tier 2 Monthly HHV Details :

January	February	March	April	May	June	July	August	September	October	November	December
N	N	N	N	N	N	N	N	N	N	N	N

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
5116.1 (Metric Tons)	0.10 (Metric Tons)	0.010 (Metric Tons)	2.4 (Metric Tons)	2.9 (Metric Tons)

Unit Name : GP-Propane Heaters
Unit Type : OCS (Other combustion source)
Unit Description :
Other Unit Name :

Small Unit Aggregation Details:
Use Ivt Indicator: Y
Highest Maximum Rated Heat Input Capacity: 0.03
Cumulative Maximum Rated Heat Input Capacity:

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)
Annual Fossil fuel based CO2 Emissions: 521.4 (metric tons)

Tier Fuel Details:

Fuel : Propane Gas
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
521.4 (Metric Tons)	0.03 (Metric Tons)	0.005 (Metric Tons)	0.6 (Metric Tons)	1.5 (Metric Tons)

Unit Name : GP-Package Boilers 5 and 6
Unit Type : OCS (Other combustion source)
Unit Description :
Other Unit Name :

Small Unit Aggregation Details:
Use Ivt Indicator: N (EGU)
Highest Maximum Rated Heat Input Capacity: 99.9
Cumulative Maximum Rated Heat Input Capacity: 99.9

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)
Annual Fossil fuel based CO2 Emissions: 25396.4 (metric tons)

Tier Fuel Details:

January	February	March	April	May	June	July	August	September	October	November	December
N	N	N	N	N	N	N	N	N	N	N	N

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
25396.4 (Metric Tons)	0.48 (Metric Tons)	0.048 (Metric Tons)	12 (Metric Tons)	14.3 (Metric Tons)

Equation C2a/C9a Inputs :
Fuel Quantity : 463734953.22 (scf/year)
Use Default High Heat Value : false
Equation C2b Inputs :

	Fuel Combusted	High Heat Value
January	47634073.04 (scf/month)	0.00103164 (mmBtu/scf)
February	40051393.78 (scf/month)	0.00103192 (mmBtu/scf)
March	39965933.93 (scf/month)	0.00103120 (mmBtu/scf)
April	51365120.4 (scf/month)	0.00103117 (mmBtu/scf)
May	40568650.33 (scf/month)	0.00102821 (mmBtu/scf)
June	50732537.91 (scf/month)	0.00102975 (mmBtu/scf)
July	20322393.75 (scf/month)	0.00103000 (mmBtu/scf)
August	31540379.49 (scf/month)	0.00103242 (mmBtu/scf)
September	37039102.38 (scf/month)	0.00103412 (mmBtu/scf)
October	27716885.59 (scf/month)	0.00103515 (mmBtu/scf)
November	33207401.32 (scf/month)	0.00103495 (mmBtu/scf)
December	43591081.29 (scf/month)	0.00103631 (mmBtu/scf)

Unit Name : No. 2 Power Boiler U501
Unit Type : S (Stoker Boiler)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 784 (mmBtu/hr)

Plant Code : 54101 (numeric, maximum of 6 digits)

Emission Details:
Annual Biogenic CO2 Emissions: (metric tons)

Tier 4 Details:

Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Tier 4 Quarter Fuel Details

First Quarter	Second Quarter	Third Quarter	Fourth Quarter
167600.9 (Metric Tons)	162143.3 (Metric Tons)	96153.5 (Metric Tons)	107903.1 (Metric Tons)

Total Source Operating Hours: 8269

Operating Hours Details:
Operating hours in which a substitute data value was used in the emissions calculations for CO2 concentration : 0
Operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate : 20
Operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content : 0

Non-Biogenic CO2 emission : 285879.4 (Metric Tons)
Biogenic CO2 emission : 247921.4 (Metric Tons)
Annual CO2 emission measured by CEMS : 533800.8 (Metric Tons)
Emissions reported for the CEMS include emissions calculated according to 98.33(a)(4)(viii) for a slipstream that bypassed the CEMS. :

Tier Fuel Details:

Fuel : Bituminous

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
17.50 (Metric Tons)	2.546 (Metric Tons)	437.5 (Metric Tons)	758.6 (Metric Tons)

Fuel : Natural Gas (Weighted U.S. Average)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
0.55 (Metric Tons)	0.055 (Metric Tons)	13.8 (Metric Tons)	16.5 (Metric Tons)

Fuel : Wood and Wood Residuals (dry basis)

Fuel Emission Details :

Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
19.03 (Metric Tons)	9.515 (Metric Tons)	475.8 (Metric Tons)	2835.5 (Metric Tons)

Subpart AA: Pulp and Paper Manufacturing

CEMS Monitoring Location (CML) Details for Subpart AA

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	80,621.2 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	1,204,749 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	27.64 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	5.53 (Metric Tons)
Own Result?

Summary Information for the facility:

Annual Steam Purchase Quantity	()
Annual Production of Unbleached Virgin Chemical Pulp	()

Unit Details:

Unit Name : No. 1 Recovery Furnace (R400)
Unit Type : Chemical Recovery Furnace
Unit Description :

Inputs:

Mass Spent Liquor Solids :	N
Basis for Determination of Mass Spent Liquor Solids	TAPPI method
Liquor Type for CO2	North American Hardwood
Default Emission Factor for CO2	93.7
Liquor Type for CO2	North American Softwood
Default Emission Factor for CO2	94.4
Default Emission Factor for CH4	0.0019
Default Emission Factor for N2O	0.00042

Outputs:

CO2 Mass Total	323839.8(Metric Tons)
CH4 Mass Total	6.52(Metric Tons)
N2O Mass Total	1.442(Metric Tons)

Tier Fuel Details:

Fuel type : Natural Gas (Weighted U.S. Average)
Tier Name : Tier 1 (Equation C-1b, natural gas billing in mmBtu)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
17325.0 (Metric Tons)	0.33 (Metric Tons)	0.033 (Metric Tons)	8.2 (Metric Tons)	9.7 (Metric Tons)

Unit Name : No. 2 Recovery Furnace (R401)
Unit Type : Chemical Recovery Furnace
Unit Description :

Inputs:

Mass Spent Liquor Solids :	N
Basis for Determination of Mass Spent Liquor Solids	TAPPI method
Liquor Type for CO2	North American Hardwood
Default Emission Factor for CO2	93.7
Liquor Type for CO2	North American Softwood
Default Emission Factor for CO2	94.4
Default Emission Factor for CH4	0.0019
Default Emission Factor for N2O	0.00042

Outputs:

CO2 Mass Total	372684.0(Metric Tons)
CH4 Mass Total	7.51(Metric Tons)
N2O Mass Total	1.660(Metric Tons)

Tier Fuel Details:

Fuel type : Distillate Fuel Oil No. 2
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
4534.7 (Metric Tons)	0.18 (Metric Tons)	0.037 (Metric Tons)	4.6 (Metric Tons)	11 (Metric Tons)

Unit Name : No. 3 Recovery Furnace (R402)
Unit Type : Chemical Recovery Furnace
Unit Description :

Inputs:

Mass Spent Liquor Solids :	N
Basis for Determination of Mass Spent Liquor Solids	TAPPI method
Liquor Type for CO2	North American Hardwood
Default Emission Factor for CO2	93.7
Liquor Type for CO2	North American Softwood
Default Emission Factor for CO2	94.4
Default Emission Factor for CH4	0.0019
Default Emission Factor for N2O	0.00042

Outputs:

CO2 Mass Total	508225.2(Metric Tons)
CH4 Mass Total	10.24(Metric Tons)
N2O Mass Total	2.264(Metric Tons)

Tier Fuel Details:

Fuel type : Residual Fuel Oil No. 6
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
11823.0 (Metric Tons)	0.47 (Metric Tons)	0.094 (Metric Tons)	11.8 (Metric Tons)	28.1 (Metric Tons)

Unit Name : No. 1 Lime Kiln (L600)
Unit Type : Pulp Mill Lime Kiln
Unit Description :

Inputs:

Quantity of Calcium Oxide Produced

Tier Fuel Details:

Fuel type : Natural Gas (Weighted U.S. Average)
Percent of Annual Heat Input Combusted : 1
Tier Name : Tier 1 (Equation C-1b, natural gas billing in mmBtu)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
23779.3 (Metric Tons)	1.21 (Metric Tons)	0 (Metric Tons)	30.3 (Metric Tons)	0 (Metric Tons)

Unit Name : No. 2 Lime Kiln (L601)
Unit Type : Pulp Mill Lime Kiln
Unit Description :

Inputs:

Quantity of Calcium Oxide Produced

Tier Fuel Details:

Fuel type : Natural Gas (Weighted U.S. Average)
Percent of Annual Heat Input Combusted : 1
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2020-01-01-00:05
Tier Methodology End Date : 2020-12-31-00:05

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
23159.2 (Metric Tons)	1.18 (Metric Tons)	0 (Metric Tons)	29.5 (Metric Tons)	0 (Metric Tons)

Make-up Unit details

Calcium Carbonate Make Up Quantity	N
Sodium Carbonate Make Up Quantity	N
CO2 Mass Total	0.0(Metric Tons)

CEMS Unit Details:

Subpart TT: Industrial Waste Landfills

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	2,951.08 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	0 (Metric Tons)
Own Result?

Landfill Details:

Was the landfill open or closed

Open

First year the landfill accepted waste

1968

If the landfill is open, the estimated year of landfill closure

2041

Landfill Capacity

706834 (Metric Tons)

Does the landfill have a landfill gas collection system

Passive vents and/or flares are present (vents or flares that are not considered part of the gas collection system)

An indication of whether leachate recirculation was used during the reporting year

The typical frequency of use of leachate recirculation over the past ten (10) years

Not used for the past ten (10) years

Each type of cover material used and Landfill surface area containing waste

Organic cover	40000 (Square Meters)
Clay cover	40000 (Square Meters)

Number of waste streams

Annual modeled methane generation TT1

3278.97 (Metric Tons)

Annual modeled methane generation TT1 user overrided value

Equation TT-1 Details:

The fraction of CH4 in landfill gas (F), is it based on a measured value or default value	Default
Fraction by volume of CH4 in landfill gas	()
An MCF value other than the default of 1 was used	N

Waste Stream For Method3 Details:

Capacity of the landfill used (or the total quantity of waste-in-place) at the end of the "YrData" from design drawings or engineering estimates	408789 (Metric Tons)
Are waste quantity data available?	Waste quantity data are available for some years
The year prior to the year when waste disposal data are first available(YrData)	2001
Do you know the year when the landfill opened?	Yes
The year the landfill first received waste from company records, or 1960 (whichever is more recent)	1968

Waste Stream For Method4 Details:

Quantity of waste-in-place at the start of the reporting year from design drawings or engineering estimates	14489 (Metric Tons)
Cumulative Quantity of waste placed in the landfill	329469 (Metric Tons)
The year prior to the year when waste disposal data are first available (YrData)	2001
Do you know the year when the landfill opened?	Y
The year the landfill first received waste from company records, or 1960 (whichever is more recent)	1984
The number of years, from YrOpen to YrLast in Equation TT-4b, for which annual waste disposal quantities are available	13

Methane Generation and Emissions for Landfills without LFG Collection Systems

Methane Oxidation Fraction

Methane Oxidation Fraction TT-6

0.10

Gas Collection Systems details

Methane Generation Equation TT6

2951.08 (Metric Tons)

Waste Stream Summary:

Stream Identification and Method(s) used to determine historical waste stream quantity for 049-088D Plywood

Stream Name

049-088D Plywood

Stream Description

Plywood Landfill (closed)

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

other pulp and paper wastes

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1968

Last year this waste stream was placed in the landfill

1993

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1968	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1969	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1970	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1971	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1972	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1973	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1974	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1975	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1976	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1977	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1978	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1979	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1980	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1981	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1982	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1983	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1984	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1985	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1986	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1987	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1988	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1989	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1990	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1991	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1992	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1993	N	N	Y	N	0.04	3380 (Metric Tons)	0.2 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for 049-006D ISWL

Stream Name

049-006D ISWL

Stream Description

Industrial Solid Waste Landfill

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

other pulp and paper wastes

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1984

Last year this waste stream was placed in the landfill

2021

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1984	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1985	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1986	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1987	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1988	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1989	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1990	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1991	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1992	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1993	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1994	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1995	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1996	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1997	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1998	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
1999	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2000	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2001	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2002	N	N	N	Y	0.04	14489 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2003	N	N	N	Y	0.04	14997 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2004	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2005	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2006	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2007	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2008	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2009	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2010	N	N	N	Y	0.04	11305 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2011	N	N	N	Y	0.04	16300 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2012	N	N	N	Y	0.04	7993 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2013	N	N	N	Y	0.04	11081 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2014	N	N	N	Y	0.04	14508 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2015	N	N	N	Y	0.04	5436 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2016	N	N	N	Y	0.04	24539 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2017	N	N	N	Y	0.04	5721 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2018	N	N	N	Y	0.04	11823 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2019	N	N	N	Y	0.04	57758 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2020	N	N	N	Y	0.04	9060 (Metric Tons)	0.2 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for 049-099D Sludge

Stream Name

049-099D Sludge

Stream Description

Sludge Monofill

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

wastewater sludge

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

1999

Last year this waste stream was placed in the landfill

2021

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
1999	Y	N	N	N	0.06	7230 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2000	Y	N	N	N	0.06	17949 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2001	Y	N	N	N	0.06	19531 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2002	Y	N	N	N	0.06	21202 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2003	Y	N	N	N	0.06	16164 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2004	Y	N	N	N	0.06	25245 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2005	Y	N	N	N	0.06	17260 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2006	Y	N	N	N	0.06	8554 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2007	Y	N	N	N	0.06	5676 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2008	Y	N	N	N	0.06	33176 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2009	Y	N	N	N	0.06	19214 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2010	Y	N	N	N	0.06	21133 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2011	Y	N	N	N	0.06	11567 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2012	Y	N	N	N	0.06	134286 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2013	Y	N	N	N	0.06	133886 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2014	Y	N	N	N	0.06	132 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2015	Y	N	N	N	0.06	39402 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2016	Y	N	N	N	0.06	173453 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2017	Y	N	N	N	0.06	250451 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.06	179285 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.06	50995 (Metric Tons)	0.12 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.06	58012 (Metric Tons)	0.12 (Metric Tons)	Y	N	N

Stream Identification and Method(s) used to determine historical waste stream quantity for 049-011D Ash Monofill

Stream Name

049-011D Ash Monofill

Stream Description

Boiler Ash

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

boiler ash

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

2011

Last year this waste stream was placed in the landfill

2021

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
2011	Y	N	N	N	0.04	154237 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2012	Y	N	N	N	0.04	91097 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2013	Y	N	N	N	0.04	89915 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2014	Y	N	N	N	0.04	46610 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2015	Y	N	N	N	0.04	0.0 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2016	Y	N	N	N	0.04	1416 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2017	Y	N	N	N	0.04	68558 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	80240 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	93338 (Metric Tons)	0.06 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	73750 (Metric Tons)	0.06 (Metric Tons)	Y	N	N

Method #1: Used one of the waste quantity measurement methods specified in 98.463(a)(2)(i): direct mass measurements, direct volume measurements multiplied by waste stream density, mass balance procedures (difference between the mass of process inputs and the mass of process outputs), or the number of loads multiplied by the mass of waste per load based on the working capacity of the vehicle or container.
Method #2: Calculated the average waste disposal rate per Equation TT-2 and calculated the waste disposal quantities for historic years in which direct waste disposal measurements are not available using historical production data per Equation TT-3.
Method #3: Calculated an average annual bulk waste disposal quantity for historic years when waste quantity data as determined by other methods are available consecutively for the most recent disposal years (Equation TT-4a).
Method #4: Calculated an average annual bulk waste disposal quantity for historic years when waste quantity data as determined by other methods are available for sporadic (non-consecutive) years (Equation TT-4b).