GHG Summary Report

CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons):224,055.2
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons):
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons):0
Cogeneration Unit Emissions Indicator:N
GHG Report Start Date:2020-01-01
GHG Report End Date:2020-12-31
Description of Changes to Calculation Methodology:
Plant Code Indicator:N
Primary NAICS Code:322121
Second Primary NAICS Code:

Parent Company Details:

Parent Company Name:FIRST QUALITY ENTERPRISES INC
Address:904 Woods Avenue, Lock Haven, PA 17745
Percent Ownership Interest:100

Subpart C: General Stationary Fuel Combustion

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	219,230.6 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	4.13 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	0.413 (Metric Tons)
Own Result?

Unit Details:

Unit Name : GP-FQTNE
Unit Type : OCS (Other combustion source)
Unit Description :
Other Unit Name :

Small Unit Aggregation Details:
Use Ivt Indicator: Y
Highest Maximum Rated Heat Input Capacity: 124
Cumulative Maximum Rated Heat Input Capacity: 635

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)
Annual Fossil fuel based CO2 Emissions: 219228.2 (metric tons)

Tier Fuel Details:

Fuel : Natural Gas (Weighted U.S. Average)
Tier Name : Tier 1 (Equation C-1a, natural gas billing in therms)
Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
219228.2 (Metric Tons)	4.13 (Metric Tons)	0.413 (Metric Tons)	103.3 (Metric Tons)	123.1 (Metric Tons)

Unit Name : FQTNE-Diesel
Unit Type : RICE (Reciprocating internal combustion engine)
Unit Description :

Individual Unit Details:
Use Ivt Indicator: Y
Maximum Rated Heat Input Capacity: 1.27 (mmBtu/hr)

Emission Details:
Annual CO₂ mass emissions from sorbent: 0 (Metric Tons)
Annual Biogenic CO2 Emissions: 0 (metric tons)

Tier Fuel Details:

Fuel : Distillate Fuel Oil No. 2
Tier Name : Tier 1 (Equation C-1)
Tier Methodology Start Date : 2020-01-01
Tier Methodology End Date : 2020-12-31

Fuel Emission Details :

Total CO2 emissions	Total CH4 emissions	Total N2O emissions	Total CH4 emissions CO2e	Total N2O emissions CO2e
2.4 (Metric Tons)	0.00 (Metric Tons)	0.000 (Metric Tons)	0 (Metric Tons)	0 (Metric Tons)

Subpart TT: Industrial Waste Landfills

Gas Information Details

Gas Name	Carbon Dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Biogenic Carbon dioxide
Gas Quantity	0 (Metric Tons)
Own Result?

Gas Name	Methane
Gas Quantity	183.93 (Metric Tons)
Own Result?

Gas Name	Nitrous Oxide
Gas Quantity	0 (Metric Tons)
Own Result?

Landfill Details:

Was the landfill open or closed

Open

First year the landfill accepted waste

2005

If the landfill is open, the estimated year of landfill closure

2068

Landfill Capacity

418527.3 (Metric Tons)

Does the landfill have a landfill gas collection system

Passive vents and/or flares are present (vents or flares that are not considered part of the gas collection system)

An indication of whether leachate recirculation was used during the reporting year

The typical frequency of use of leachate recirculation over the past ten (10) years

Not used for the past ten (10) years

Each type of cover material used and Landfill surface area containing waste

Organic cover

4050 (Square Meters)

Number of waste streams

Annual modeled methane generation TT1

204.37 (Metric Tons)

Annual modeled methane generation TT1 user overrided value

Equation TT-1 Details:

The fraction of CH4 in landfill gas (F), is it based on a measured value or default value	Default
Fraction by volume of CH4 in landfill gas	()
An MCF value other than the default of 1 was used	N

Waste Stream For Method3 Details:

Capacity of the landfill used (or the total quantity of waste-in-place) at the end of the "YrData" from design drawings or engineering estimates	()
Do you know the year when the landfill opened?	No
The year the landfill first received waste from company records, or 1960 (whichever is more recent)

Methane Generation and Emissions for Landfills without LFG Collection Systems

Methane Oxidation Fraction

Methane Oxidation Fraction TT-6

0.10

Gas Collection Systems details

Methane Generation Equation TT6

183.93 (Metric Tons)

Waste Stream Summary:

Stream Identification and Method(s) used to determine historical waste stream quantity for Wastewater Sludge

Stream Name

Wastewater Sludge

Stream Description

Dewatered sludge from wastewater treatment

Type(s) Of Waste Present In The Waste Stream

pulp and paper wastes segregated into separate streams

wastewater sludge

Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill

First year this waste stream was placed in the landfill

2005

Last year this waste stream was placed in the landfill

2020

Method(s) used to determine historical waste stream quantity

Reporting Year	Method #1	Method #2	Method #3	Method #4	Decayrate	Waste disposed quantity (UOM)	Waste stream DOC value (UOM)	Is defaulted value from table TT1	Is value measured using 60 day anaerobic biodegradation test	Is based on total volatile solids measurements
2005	Y	N	N	N	0.04	6189 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2006	Y	N	N	N	0.04	12971 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2007	Y	N	N	N	0.04	10352 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2008	Y	N	N	N	0.04	11938 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2009	Y	N	N	N	0.04	8369 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2010	Y	N	N	N	0.04	4637 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2011	Y	N	N	N	0.04	7316 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2012	Y	N	N	N	0.04	6288 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2013	Y	N	N	N	0.04	6151 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2014	Y	N	N	N	0.04	2054 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2015	Y	N	N	N	0.04	2248 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2016	Y	N	N	N	0.04	8281 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2017	Y	N	N	N	0.04	2667 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2018	Y	N	N	N	0.04	6273 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2019	Y	N	N	N	0.04	9662 (Metric Tons)	0.2 (Metric Tons)	Y	N	N
2020	Y	N	N	N	0.04	14595 (Metric Tons)	0.2 (Metric Tons)	Y	N	N

Method #1: Used one of the waste quantity measurement methods specified in 98.463(a)(2)(i): direct mass measurements, direct volume measurements multiplied by waste stream density, mass balance procedures (difference between the mass of process inputs and the mass of process outputs), or the number of loads multiplied by the mass of waste per load based on the working capacity of the vehicle or container.
Method #2: Calculated the average waste disposal rate per Equation TT-2 and calculated the waste disposal quantities for historic years in which direct waste disposal measurements are not available using historical production data per Equation TT-3.
Method #3: Calculated an average annual bulk waste disposal quantity for historic years when waste quantity data as determined by other methods are available consecutively for the most recent disposal years (Equation TT-4a).
Method #4: Calculated an average annual bulk waste disposal quantity for historic years when waste quantity data as determined by other methods are available for sporadic (non-consecutive) years (Equation TT-4b).