Facility Name: Walter Energy, Inc
Facility Identifier:
Facility Reporting Year: 2014
Facility Location:
Address: 16243 Hwy 216
City: Brookwood
State: AL
Postal Code: 35444

Facility Site Details:
CO2 equivalent emissions from facility subparts C-II, SS, and TT (metric tons): 4,141,672.8
CO2 equivalent emissions from supplier subparts LL-QQ (metric tons): NaN
Biogenic CO2 emissions from facility subparts C-II, SS, and TT (metric tons): 0
Cogeneration Unit Emissions Indicator: N
GHG Report Start Date: 2014-01-01
GHG Report End Date: 2014-12-31
Description of Changes to Calculation Methodology:
Did you use BAMM in this reporting year as a result of becoming newly subject to a Part 98 subpart due to amendments to global warming potentials (Table A-1 of Part 98) finalized on November 29, 2013? N
Part 75 Biogenic Emissions Indication:
Plant Code Indicator: N
Primary NAICS Code: 212112
Second Primary NAICS Code:

Parent Company Details:
Parent Company Name: WALTER ENERGY INC
Address: 3000 Riverchase Galleria #1700, Hoover,  AL 35244
Percent Ownership Interest: 100

Subpart FF: Underground Coal Mines

Gas Information Details

Gas NameMethane
Gas Quantity165,666.51 (Metric Tons)
Own Result?

Gas NameCarbon Dioxide
Gas Quantity10 (Metric Tons)
Own Result?


SubpartFFSummaryDetails:
MSHA Individual Identification Number:0101247, 0101401
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]45977.74
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]2.084
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]38710.64
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]2.697
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]41875.46
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]2.626
Quarterly CH4 emissions (net) from all ventilation and degasification systems (facility total) (MT CH4, unrounded) [§98.326(d)]39102.67
Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (MT CO2, unrounded) [§98.326(e)]2.61


DegasCollectionDetails:


DeGasCollectionSystemRowDetails:
Degasification Gas Collection System Unit ID or Name [§98.326(q)]Low Quality Gas Plant
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]122
Surface Area, m2 [§98.326(q)]19748659
Annual Operating Hours [§98.326(q)]7728
Degasification Gas Collection System Unit ID or Name [§98.326(q)]BWM Sales #1
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]429
Surface Area, m2 [§98.326(q)]19748659
Annual Operating Hours [§98.326(q)]8760
Degasification Gas Collection System Unit ID or Name [§98.326(q)]BWM Sales #2
Manufacturer [§98.326(q)]
Capacity [§98.326(q)]
Unit of Measure for Capacity, scfm or acfm [§98.326(q)]
Number of Wells [§98.326(q)]429
Surface Area, m2 [§98.326(q)]19748659
Annual Operating Hours [§98.326(q)]8760


WellAndShaftDetails:


WellAndShaftCollectionRowDetails:
Well and Shaft ID or Name [§98.326(r)]Mine 4 North 4-5
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]1983-12-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 4 North 4-7
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2003-09-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 4 Bleeder 4-9
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]Bleeder shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2008-10-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 4 West Fan 4-10
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2011-05-15
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 4 East Fan 4-12
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 7 South 7-1
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]1986-03-09
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 7 North 7-6
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2013-01-01
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]0
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 7 Bleeder 7-7
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]Bleeder shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]2013-01-01
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]0
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 7 North 7-8
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2008-11-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 7 East 7-9
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2007-10-13
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]Mine 7 Bleeder 7-13
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]Bleeder shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2009-12-06
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)]BWM Sales #1
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]BWM Sales #1
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]Gas Sales Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]1985-12-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored as part of a centralized monitoring point
Identify the Centralized Monitoring Point [§98.326(s)]Sales#1
Well and Shaft ID or Name [§98.326(r)]BWM Sales #2
Identify if this is a well or a shaft [§98.326(r)]Well
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]BWM Sales #2
Description [§98.326(r)]Other (specify)
Additional Information for Description [§98.326(r)]Gas Sales Point
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]1985-12-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored as part of a centralized monitoring point
Identify the Centralized Monitoring Point [§98.326(s)]Sales #2
Well and Shaft ID or Name [§98.326(r)]Mine 7 Bleeder 7-14
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]Bleeder shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2013-02-01
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]365
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]
Well and Shaft ID or Name [§98.326(r)] Mine 7 East 7-16
Identify if this is a well or a shaft [§98.326(r)]Shaft
Gas Collection System Unit ID or Name (if applicable) [§98.326(q)]Not Applicable (well/shaft not associated with gas collection system)
Description [§98.326(r)]exhaust vent shaft
Additional Information for Description [§98.326(r)]
Start date of well or shaft (MM/DD/YYYY) [§98.326(r)]2012-03-04
Close date of well or shaft (MM/DD/YYYY) [§98.326(r)]
Number of days the well or shaft was in operation during the reporting year [§98.326(r)]322
Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point [§98.326(r)]monitored individually
Identify the Centralized Monitoring Point [§98.326(s)]


VentilationQuarterlyDetails:


VentilationMonitoringQuarterlyRowDetails:
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-5
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]529896
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1966667
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]516.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0045677
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12651.4950874
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-7
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]1079749
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.075
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]518.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0044563
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12053.5564696
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 Bleeder 4-9
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]368819.3333333
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.3083333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]524.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0043449
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12848.6182969
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 West Fan 4-10
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]1002399.6666667
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-18
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.3175
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-18
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]524.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0041221
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-17970.5517557
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-5
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]466632.6666667
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-05-19
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1244444
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-05-19
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0040107
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11420.7427794
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-7
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]1082178
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-05-19
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0583333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-05-19
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]535.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0040107
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11548.3172687
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 Bleeder 4-9
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]350525
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-05-19
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.3083333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-05-19
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]543.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0040107
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12613.4382877
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 West Fan 4-10
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]1041180.3333333
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-05-19
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.4141667
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-05-19
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]543.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0037879
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-110425.0340032
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 East Fan 4-12
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]472642.3333333
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]1
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-05-20
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0758333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]1
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-05-20
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]536.4466667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]0.6693405
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11761.4841115
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-5
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]482298
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0922222
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0021168
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11085.4912802
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-7
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]1075893
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0416667
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]536.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0021168
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11095.3988823
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 Bleeder 4-9
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]338504.6666667
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.275
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0020053
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12243.7232123
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 West Fan 4-10
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]916307
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.4258333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]544.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0018939
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-19403.8197345
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 East Fan 4-12
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]536343
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]1
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-07
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1458333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]1
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-07
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0018939
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11921.55061
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-5
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]492546.0868216
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-01
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0411111
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-01
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]525.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0140374
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1511.1523134
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 North 4-7
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]917568.3333333
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-01
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.05
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-01
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]526.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0137032
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11155.5376752
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 Bleeder 4-9
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]359779.6666667
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-01
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2583333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-01
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0135918
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12294.2308898
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 West Fan 4-10
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]946234.3333333
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-01
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.3183333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-01
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0134804
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-17434.5235431
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 4 East Fan 4-12
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]518903
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]1
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-02
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2133333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]1
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-02
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]522.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0131462
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12807.9727036
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 South 7-1
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]447720.8415367
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0333333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]519.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0081328
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-1379.1039095
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 North 7-8
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]974343.7644668
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1222222
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]521.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0080214
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-12945.0205817
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 East 7-9
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]903917.0957483
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.175
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]517.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.00791
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13991.1644038
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-13
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]486002.2428573
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.9058333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]530.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0077986
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-110954.3133115
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-14
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]420111.7614218
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.8083333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]532.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0074643
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-18415.3873379
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)] Mine 7 East 7-16
Quarter1
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-01-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]851927.4146076
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-02-08
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2666667
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-02-08
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]515.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0075758
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13768.5307167
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 South 7-1
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]492560.2253728
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-06-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-06-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0050134
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-10
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 North 7-8
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]700994.6904909
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-06-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-06-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0050134
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11689.5297374
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 East 7-9
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]825338.3374443
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-06-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1666667
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-06-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]531.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0051248
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13369.8305668
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-13
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]343405.628856
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-06-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.7458333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-06-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0051248
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-16242.295871
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-14
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-06-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]259150.0613253
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-06-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.8575
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-06-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]539.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0036765
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-15408.2201191
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)] Mine 7 East 7-16
Quarter2
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-04-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]912119.4047766
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-06-04
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2888889
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-06-04
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]531.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0051248
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-14231.743471
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 South 7-1
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]488094.4884133
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0083333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0028966
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-19940.4326931
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 North 7-8
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]702138.0003692
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0888889
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0027852
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11491.6019915
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 East 7-9
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]834817.9194292
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1583333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0027852
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13216.4378083
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-13
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]371543.3534476
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.3416667
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]537.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0027852
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13098.1872919
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-14
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-09-30
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]326764.5529433
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.8233333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]540.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0015597
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-16529.7190058
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)] Mine 7 East 7-16
Quarter3
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-07-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]869360.3437815
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-08-06
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1333333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-08-06
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0027852
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-11849.0944945
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 South 7-1
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]469246.6917361
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-05
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.0083333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-05
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]522.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0157086
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-199.5043391
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 North 7-8
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]745596.7940877
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-05
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.1888889
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-05
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]526.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0159314
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-13559.5063142
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 East 7-9
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]904978.5405217
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-05
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2083333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-05
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]520.67
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0160428
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-14814.4860334
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-13
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]471954.8460284
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-05
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.4
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-05
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]528.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0161542
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-14754.3027844
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)]Mine 7 Bleeder 7-14
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-12-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]367935.7805287
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-05
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.7833333
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-05
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]533.0033333
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0160428
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-17189.5903998
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]
Ventilation Monitoring Point that corresponds to centralized monitoring point or individual shaft from previous tab [§98.326(l)] Mine 7 East 7-16
Quarter4
Dates where active ventilation of mining operations is taking place (MM/DD/YYYY) [§98.326(l)] - Start date2013-10-01
Stop date2013-03-31
Method used for flow rate [§98.326(f), (r), (s)]Monitored using 98.324(b)(2)
V - Quarterly volumetric flow rate used in Eq. FF-1 (acfm or scfm per selection in column A7) [§98.326(f)]871939.9883507
Specify units for parameter V, quarterly volumetric flow rate [§98.326(f)]scfm
Length of time that substitute data are used for the quarterly volumetric flow rate used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(f)]0
Location of each measurement of flow rate used in Eq. FF-1 [§98.326(f)]Fan shaft approaches
Date of each measurement of flow rate used in Eq. FF-1 (MM/DD/YYYY) [§98.326(f)]2014-11-05
Dates when continuous monitoring equipment for the flow rate is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
Method used for concentration [§98.326(g), (r), (s)]Monitored using 98.324(b)(2)
C - Quarterly CH4 concentration used in Eq. FF-1 (volume %) [§98.326(g)]0.2
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
Length of time that substitute data are used for the quarterly CH4 concentration (hours) [§98.3(c)(8), §98.326(g)]0
Location of each measurement of concentration [§98.326(g)]Fan shaft approaches
Date of each measurement of concentration (MM/DD/YYYY) [§98.326(g)]2014-11-05
Dates when continuous monitoring equipment for the concentration is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
T - Temperature used in Eq. FF-1 (°R) [§98.326(o)]517.3366667
Length of time that substitute data are used for the temperature used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
P - Absolute Pressure used in Eq. FF-1 (atm) [§98.326(o)]1.0160428
Length of time that substitute data are used for the pressure used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-1 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-1 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-1 (hours) [§98.3(c)(8), §98.326(o)]0
CH4V - Quarterly CH4 liberated from ventilation monitoring point (MT CH4) [§98.326(a)] --- Output of Eq. FF-14481.8650257
File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate [§98.326(a)]


DegasQuarterlyDetails:


DegasQuarterlyGasCollectionRowDetails:
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabLow Quality Gas Plant
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-01-01
Stop date2014-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]77
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date2014-01-01
Stop date2014-03-31
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabLow Quality Gas Plant
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-04-01
Stop date2014-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]81
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date2014-04-01
Stop date2014-06-30
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabLow Quality Gas Plant
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-07-01
Stop date2014-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]73
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date2014-07-01
Stop date2014-09-30
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabLow Quality Gas Plant
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-10-01
Stop date2014-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(1)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]82
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date2014-10-01
Stop date2014-12-31
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #1
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-01-01
Stop date2014-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #1
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-04-01
Stop date2014-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #1
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-07-01
Stop date2014-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #1
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-10-01
Stop date2014-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #2
Quarter1
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-01-01
Stop date2014-03-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #2
Quarter2
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-04-01
Stop date2014-06-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #2
Quarter3
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-07-01
Stop date2014-09-30
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tabBWM Sales #2
Quarter4
Dates where degasification of mining operations is taking place (MM/DD/YYYY) [§98.326(m)] - Start date2014-10-01
Stop date2014-12-31
Method used for concentration [§98.326(r), (s)]Monitored using 98.324(c)(2)
Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, volume %) [§98.326(i)]
Length of time that substitute data are used for the quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems (average from daily data, hours) [§98.3(c)(8), 98.326(i)]
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CI - Quarterly CH4 concentration based on results from weekly sampling data, volume % [§98.326(i)]98
Length of time that substitute data are used for the quarterly CH4 concentration data based on results from weekly sampling data used to calculate CH4 liberated from degasification systems (hours) [§98.3(c)(8), §98.326(i)]0
Was Eq. FF-9 required to calculate CH4 concentration? [§98.326(o)]No
If yes, provide the gaseous organic concentration correction factor, used in Eq. FF-9 [§98.326(o)]
TI - Temperature used in Eq. FF-3 (°R) [§98.326(o)]520
Length of time that substitute data are used for the temperature used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
PI - Absolute Pressure used in Eq. FF-3 (atm) [§98.326(o)]1
Length of time that substitute data are used for the pressure used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? [§98.326(f)-(g)]
Was a flow meter used? [§98.326(f)-(g)]
fH2O - Moisture content used in Eq. FF-3 (cubic feet water per cubic feet biogas) [§98.326(o)]0.01
Length of time that substitute data are used for the moisture content used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0
Moisture correction factor used in Eq. FF-3 [§98.326(o)]1
Length of time that substitute data are used for the moisture correction factor used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(o)]0


DegasWeeklyDetails:


DegasWeeklyGasCollectionRowDetails:
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9503.7075955
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3267.1651867
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9162.088151
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3257.5616902
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10595.8777344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3297.8679242
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10193.8048177
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3286.564979
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9043.7846788
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3254.2359809
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9694.994401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3272.5425802
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9804.800651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3275.6294184
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9902.7687066
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3278.383465
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9263.5589844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3260.4142058
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9443.469401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3265.4717899
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9663.9735677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3271.6705325
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10206.6180122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3286.9251794
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10434.219401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3293.3234369
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10649.5089844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3299.3755887
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10955.1902344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3307.9688022
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10378.3492622
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3291.7528334
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10578.4937066
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3297.37923
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10731.0263455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3301.6671787
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]11338.8089844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3318.7529697
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]11026.4235677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3309.9712909
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10294.7902344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3289.4038487
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10817.7714844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3304.1057303
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10857.8034288
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3305.2310955
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10431.7075955
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3293.2528258
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9543.2138455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3268.2757738
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]8936.8957899
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3251.2311546
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9624.0263455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3270.5475489
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10336.931901
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3290.5885218
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10546.163151
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3296.4703637
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10367.8200955
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3291.4568408
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9590.1180122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3269.5943287
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9075.550651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3255.1289757
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10604.4770399
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3298.1096651
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10267.875651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3288.6472346
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10099.825651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3283.9230668
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9752.8423177
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3274.1687823
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9568.7749566
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3268.9943396
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9710.6839844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3272.9836407
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9857.2985677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3277.105223
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10132.0555122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3284.8291023
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9867.163151
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3277.382533
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9718.5714844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3273.2053716
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9525.5798177
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3267.7800516
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10115.6846788
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3284.3688907
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10435.4041233
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3293.3567414
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9781.4034288
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3274.9716831
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9268.2027344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3260.5447494
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales#1
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9036.0013455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3254.0171783
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9503.7075955
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3267.1651867
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9162.088151
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3257.5616902
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10595.8777344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3297.8679242
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10193.8048177
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3286.564979
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9043.7846788
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3254.2359809
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9694.994401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3272.5425802
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9804.800651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3275.6294184
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9902.7687066
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3278.383465
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9263.5589844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3260.4142058
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9443.469401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3265.4717899
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9663.9735677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3271.6705325
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter1
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10206.6180122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3286.9251794
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10434.219401
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3293.3234369
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10649.5089844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3299.3755887
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10955.1902344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3307.9688022
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10378.3492622
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3291.7528334
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10578.4937066
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3297.37923
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10731.0263455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3301.6671787
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]11338.8089844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3318.7529697
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]11026.4235677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3309.9712909
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10294.7902344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3289.4038487
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10817.7714844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3304.1057303
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10857.8034288
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3305.2310955
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter2
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10431.7075955
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3293.2528258
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9543.2138455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3268.2757738
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]8936.8957899
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3251.2311546
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9624.0263455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3270.5475489
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10336.931901
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3290.5885218
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10546.163151
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3296.4703637
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10367.8200955
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3291.4568408
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9590.1180122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3269.5943287
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9075.550651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3255.1289757
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10604.4770399
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3298.1096651
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10267.875651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3288.6472346
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10099.825651
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3283.9230668
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter3
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9752.8423177
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3274.1687823
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week1
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9568.7749566
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3268.9943396
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week2
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9710.6839844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3272.9836407
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week3
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9857.2985677
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3277.105223
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week4
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10132.0555122
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3284.8291023
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week5
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9867.163151
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3277.382533
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week6
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9718.5714844
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3273.2053716
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week7
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9525.5798177
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3267.7800516
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week8
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10115.6846788
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3284.3688907
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week9
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]10435.4041233
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3293.3567414
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week10
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9781.4034288
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3274.9716831
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week11
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9268.2027344
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3260.5447494
Degasification Gas Collection System Monitoring Point [§98.326(m)] Corresponds to centralized monitoring point or individual well from previous tab -Sales #2
Quarter4
Week12
Method used for flow rate and to calculate CH4 liberated from degasification systems used in Eq. FF-3 [§98.326(h), (r), (s)]Monitored using 98.324(c)(2)
VI - Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (acfm or scfm per selection in column A6) [§98.326(h)]9036.0013455
Specify units for parameter Vl, weekly volumetric flow rate [§98.326(h)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3 (hours) [§98.3(c)(8), §98.326(h)]0
Dates when continuous monitoring equipment is not properly functioning, if applicable (MM/DD/YYYY) [§98.326(n)] - Start date
Stop date
CH4D - Weekly CH4 liberated at the monitoring point (MT CH4) [§98.326(b)] --- Output of Eq. FF-3254.0171783


DestructionOrOffsiteDetails:


DestructionOrOffsiteBackupDevicesRowDetails:
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Gas is transported off-site
Description of the Device [§98.326(p)]
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]
Annual operating hours of primary destruction device (hours) [§98.326(p)]
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]Yes, gas is destroyed offsite
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]Sales#1
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Is gas destroyed at the mine or transported offsite? [§98.326(p)]Gas is transported off-site
Description of the Device [§98.326(p)]
Additional Information for Description [§98.326(p)]
Indicate if a back-up destruction device (or devices) is present at the mine [§98.326(p)]
Annual operating hours of primary destruction device (hours) [§98.326(p)]
DE - Destruction efficiency assumed for primary destruction device and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 1 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5 (%) [§98.326(p)]
Annual operating hours of back-up destruction device Number 2 [§98.326(p)]
DE - Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5 (%) [§98.326(p)]
If gas is transported offsite, is the gas destroyed offsite? [§98.326(p)]Yes, gas is destroyed offsite
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10) [§98.326(p)]Sales #2
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (2 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (3 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (4 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (5 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (6 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (7 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (8 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (9 of 10) [§98.326(p)]
Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device, if applicable (10 of 10) [§98.326(p)]


DestructionOrOffsiteQuarterlyDetails:


DestructionOrOffsiteQuarterlyBasisRowDetails:
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3274.4329322
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3612.1848307
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3338.1422569
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3289.5395049
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3274.4329322
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3612.1848307
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3338.1422569
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
CH4DestroyedA - Quarterly CH4 destroyed onsite (MT CH4) [§98.326(c)]
CH4DestroyedB - Quarterly CH4 transported offsite (MT CH4) [§98.326(c)]3289.5395049


DestructionOrOffsiteWeeklyDetails:


DestructionOrOffsiteWeeklyBasisRowDetails:
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9503.7075955
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9162.088151
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10595.8777344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10193.8048177
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9043.7846788
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9694.994401
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9804.800651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9902.7687066
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9263.5589844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9443.469401
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9663.9735677
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter1
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10206.6180122
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10434.219401
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10649.5089844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10955.1902344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10378.3492622
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10578.4937066
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10731.0263455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]11338.8089844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]11026.4235677
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10294.7902344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10817.7714844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10857.8034288
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter2
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10431.7075955
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9543.2138455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]8936.8957899
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9624.0263455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10336.931901
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10546.163151
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10367.8200955
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9590.1180122
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9075.550651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10604.4770399
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10267.875651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10099.825651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter3
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9752.8423177
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9568.7749566
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9710.6839844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9857.2985677
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10132.0555122
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9867.163151
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9718.5714844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9525.5798177
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10115.6846788
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10435.4041233
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9781.4034288
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9268.2027344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #1
Quarter4
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9036.0013455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9503.7075955
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9162.088151
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10595.8777344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10193.8048177
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9043.7846788
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9694.994401
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9804.800651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9902.7687066
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9263.5589844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9443.469401
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9663.9735677
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter1
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10206.6180122
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10434.219401
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10649.5089844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10955.1902344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10378.3492622
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10578.4937066
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10731.0263455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]11338.8089844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]11026.4235677
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10294.7902344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10817.7714844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10857.8034288
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter2
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10431.7075955
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9543.2138455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]8936.8957899
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9624.0263455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10336.931901
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10546.163151
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10367.8200955
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9590.1180122
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9075.550651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10604.4770399
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10267.875651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10099.825651
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter3
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9752.8423177
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week1
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9568.7749566
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week2
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9710.6839844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week3
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9857.2985677
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week4
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10132.0555122
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week5
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9867.163151
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week6
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9718.5714844
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week7
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9525.5798177
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week8
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10115.6846788
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week9
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]10435.4041233
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week10
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9781.4034288
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week11
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9268.2027344
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0
Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name [§98.326(p)]BWM Sales #2
Quarter4
Week12
Weekly volumetric flow rate used to calculate CH4 destruction (acfm or scfm per selection in column A5) [§98.326(j)]9036.0013455
Specify units for weekly volumetric flow rate [§98.326(j)]scfm
Length of time that substitute data are used for the weekly volumetric flow rate used to calculate CH4 destruction (hours) [§98.3(c)(8), §98.326(j)]0
Weekly CH4 concentration used to calculate CH4 flow (volume %) [§98.326(k)]98
Length of time that substitute data are used for the weekly CH4 concentration used to calculate CH4 flow (hours) [§98.3(c)(8), §98.326(k)]0


EmissionsSummaryFFDetails:


TotalResultForMethaneLiberatedFromVentilationSystemsRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 45977.74 N
QuarterQuarter 2 (Apr-Jun)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 38710.64 N
QuarterQuarter 3 (Jul-Sep)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 41875.46 N
QuarterQuarter 4 (Oct-Dec)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems according to Eq. FF-2 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 39102.67 N


TotalResultForMethaneLiberatedFromMonitoringPointsRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 6548.87 N
QuarterQuarter 2 (Apr-Jun)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 7224.37 N
QuarterQuarter 3 (Jul-Sep)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 6676.28 N
QuarterQuarter 4 (Oct-Dec)
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points according to Eq. FF-4 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 6579.08 N


TotalQuarterlyMethaneDestroyedAtMineTransportedOffsiteRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 6548.87 N
QuarterQuarter 2 (Apr-Jun)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 7224.37 N
QuarterQuarter 3 (Jul-Sep)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 6676.28 N
QuarterQuarter 4 (Oct-Dec)
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite according to Eq. FF-6 (MT CH4, unrounded) [§98.3(c)(4)(iii)] --- Calculated Result 6579.08 N


TotalQuarterlyNetMethaneEmissionsRowDetails:
QuarterQuarter 1 (Jan-Mar)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]45977.74
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]6548.87
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]6548.87
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]
QuarterQuarter 2 (Apr-Jun)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]38710.64
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]7224.37
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]7224.37
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]
QuarterQuarter 3 (Jul-Sep)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]41875.46
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]6676.28
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]6676.28
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]
QuarterQuarter 4 (Oct-Dec)
CH4VTotal - Facility total quarterly CH4 liberated from ventilation systems (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D2=(A2 or A4)]39102.67
CH4DTotal - Facility total quarterly CH4 liberated from all degasification monitoring points (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D3=(B2 or B4)]6579.08
CH4DestroyedTotal - Facility total quarterly CH4 destroyed at the mine and transported offsite (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D4=(C2 or C4)]6579.08
CH4emitted(net) - Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7 (MT CH4, rounded) [§98.3(c)(4)(iii)] --- [D5=D2+D3-D4]